Akerstroms Trux 700 Installation Manual

Installation Manual Trux 700 (English)
Under no circumstances can Åkerströms Trux AB be held liable for damages arising
from use of this document or from the hardware and software that is described herein.
Check the contents of the box against the label on the packaging.
Read through these installation Manual before commencing assembly.
Connect the supply cable only when everything
!
else has been assembled.
Tools are only required for assembling the ball attachments and for
attaching the nine-pin connectors.
1. Fit the ball attachments for the brackets.
The diameter of the holes is 5.5 mm.
2. Assemble the Trux computer with the brackets at the desired angle.
Three sizes of brackets are available as options.
Length: 275 mm (10⅞")
Length: 190 mm (7½")
Length: 134 mm (5¼")
93 5164-100 A0
[mm]
1a Fit the ball attachments
for the 2¼" bracket Ø8 mm
Ø 70
1½" Brackets 2¼" Brackets
438 mm (17¼")
285 mm (11¼")
210 mm (8¼")
3. Mount the antenna. 4. Connect the cable for external connections.
Only the connections for voltage feed, mouse and
keyboard are described here.
5. Connect 12 V direct current voltage supply. 12V
Ensure that pin 1 is connected to
+ pole (brown conductor) and pin 3 to
– pole (white conductor).
The length of the power cable is 4 meters (5 1/2 yards)
6. Press the start button Use the Increase and Decrease
to start the computer. buttons to set the intensity of the
screen.
The computer is now ready for use. See the user manual for more
information.
For installation of GPRS-aerial see installation manual GPRS.
12VDC
Connection for mouse
and keyboard.
0V
Connection for power
supply. Pins 5 and 6 used
for shutting down.
See the product manual for
further information. Adapter for connecting
mouse and keyboard with
PS2 connectors.
Åkerströms Trux AB
Björbovägen 143
SE-780 45 Björbo, Sweden
Phone +46 241 250 00
Fax +46 241 232 99
E-mail sales@akerstroms.se
www.akerstroms.com
MULTI PURPOSE