Other Functions (Vcr); Duplicating A Video Tape - Toshiba MW20F51 Owner's Manual

Other functions (VCR)

Duplicating a video tape

If you connect the unit to another VCR or Camcorder, you can
duplicate a previously recorded tape. Make all connections before
turning on the power.
Duplicating a video tape
Preparation:
• Press TV/VCR to select the TV/VCR mode.
• Load a cassette tape with the erase prevention tab
intact.
• Load a previously recorded tape into the playback
VCR or Camcorder.
1
Press SPEED to select the desired tape speed
SP or SLP.
It is recommended that you set the
Speed to the SP mode on the
recording VCR for best results.
Press INPUT once or twice to select AUDIO/
2
VIDEO input position.
"LINE1" or "LINE2" will appear on the
screen.
LINE1: on the rear panel
LINE2: on the front panel
3 Press REC.
4 Press PLAY on the playback VCR or camcorder.
5 Press STOP after duplicating a video tape.
Note:
Unauthorized recording of copyrighted television programs, films,
video cassettes and other materials may infringe the rights of
copyright owners and be contrary to copyright laws.
5T80101B [E]p43-44
LINE1
43
Connection with second video recorder
• Select "LINE1" on step 2.
Playback VCR
To VIDEO OUT
Audio/Video cable (not supplied)
Recording VCR
OUT PUT
VHF/UHF
VIDEO
DIGITAL AUDIO
L
COAXIAL
AUDIO
R
To AUDIO (R) IN
Connection with Camcorder
• Select "LINE2" on step 2.
Playback Camcorder
Recording VCR
To AUDIO (R) IN
To AUDIO (L) IN
To VIDEO IN
Audio/Video cable (not supplied)
For duplicating a previously recorded tape from a
camcorder, follow the camcorder manufacturer's
instructions. A typical camcorder dubbing hookup is
shown above.
3/8/05, 9:57 AM
TV/VCR
INPUT
STOP
REC
SPEED
To AUDIO (R) OUT
To AUDIO (L) OUT
LINE 1 IN
VIDEO
L
(MONO)
AUDIO
R
To VIDEO IN
To AUDIO (L) IN
To AV Jack
Illustration of MW27F51
43