Sound Control Adjustment; Stereo And Second Audio Program (Sap) - Toshiba MW20F52 Owner's Manual

Sound control adjustment/

Stereo and Second Audio Program (SAP)

Sound controls are factory preset but you can adjust them individually as follows:
The unit is equipped with a feature known as multi-channel TV sound or MTS.
MTS broadcasts greatly enhance TV viewing by bringing you programs with high
fidelity stereo sound.
MTS also provides an extra channel called the Second Audio Program or SAP
which broadcasters can use to transmit a second language for bilingual transmis-
sion or for other purposes.
Sound control adjustment
1
Press MENU and then press
option.
2
Press or to select "AUDIO", then press
3 Press to select the item you want to
or
adjust, then press
BASS: Press or
TREBLE: Press or
BALANCE: Press or
from both speakers.
SURROUND: Press or
ON: The dynamic presence and sound created offers
a thoroughly enjoyable listening experience.
OFF: Normal sound.
STABLE SOUND : Press or
ON: The Stable Sound feature limits the highest
volume level to prevent extreme changes in
volume when the signal source is changed.
OFF: Normal sound.
SAP : Press or
ON: SAP is available.
OFF: SAP is not available.
4
After the desired setting is adjusted, press
MENU repeatedly until the menu screen is
cleared.
3 3 3 3 3 To return BASS/TREBLE/BALANCE control adjustments
to the factory preset levels
Press CANCEL while making sound adjustments.
5W70101A [E]p28-33
or to select
LANGUAGE/
IDIOMA/LANGUE
PICTURE
AUDIO
PICTURE PREFERENCE
/ / / / MENU
.
LANGUAGE/
IDIOMA/LANGUE
PICTURE
AUDIO
PICTURE PREFERENCE
/ / / MENU
or to adjust the setting.
BASSCONTRAST 0
TREBLE 0
BALANCE 0
SURROUND OFF
STABLE SOUND OFF
SAP OFF
/ / / / CANCEL / MENU
to adjust the bass sound.
to adjust the treble sound.
to obtain an equal sound level
to select "ON" or "OFF".
to select "ON" or "OFF".
to select "ON" or "OFF".
33
Listening to stereo sound
When the TV is turned on or a channel selection is
made, the "STEREO" will appear on the screen. This
means that Stereo broadcasting is available. You can
enjoy stereo sound from the left and right speakers.
• When mono broadcasting is received, no indication is
displayed.
• If the broadcast signal is not strong enough or clear
stereo sound is not available, press AUDIO SELECT
to change to mono sound. The noise should be
eliminated. Press it again to return to the stereo sound.
STEREO
Listening to SAP (Second Audio Program)
When the TV is turned on or a channel selection is
made, "SAP" will appear on the screen. This means
that the Second Audio Program broadcasting is
available.
STEREO SAP
To select desired sound
Press AUDIO SELECT to select the desired sound.
STEREO
Broadcast SAP setting
MONO OFF
ON
STEREO OFF
ON
MONO+SAP OFF
ON
STEREO+SAP OFF
ON
30/1/06, 6:34 PM
AUDIO SELECT
/ / /
CANCEL
MENU
CH 013
CH 013
CH 013
Audio display
MONO
MONO
STEREO MONO
STEREO MONO
MONO
SAP
STEREO MONO
SAP
33