Toshiba D-R4SC Owner's Manual page 31

Entering characters
The cursor may be followed by unwanted characters.
You can erase them if necessary by either of the
following measures:
Erasing characters
• Erasing all the characters on the writing board
Select "Clear All" by pressing
press SELECT/ENTER button.
Alternatively, press CLEAR button.
• Erasing one character before the cursor
Select "BkSp" by pressing
press SELECT/ENTER button.
(1) Press button to select an input mode.
(2) Press / / / buttons to select a character, then
press SELECT/ENTER button.
The selected character is input on the cursor.
(3) Repeat steps (1) and (2) to enter characters.
(4) When finished, press
characters.
The characters you entered appears.
Notes
• You can enter up to 64 characters.
• When unnecessary information appears, or when you want
to alter the input character, press CLEAR button to erase
all, or select "BkSp" or "Delete" to erase an unnecessary
character.
/ / / buttons, then
/ / / buttons, then
button to save the
31