LG MCD65 Owner's Manual page 17

Synchronized Recording from CD to
Tape
1. Open the tape deck and then insert a blank
tape.
2. Close the door and insert a CD.
> Audio CD only
3. Select CD function.
4. Press on a stop status to move to CD
zB
synchronizing mode.
> The synchronized recording is started
automatically after about 7 seconds .
5. To stop recording, press x Z.
Recording to USB
You can record a various sound source to USB.
1. Connect the USB device to the unit.
2. Select a function in which you want to
record playback a sound source fi rst.
[One tracks recording]
You can record to USB after playing the fi le
you want. (CD Only )
[All tracks recording]
You can record to USB after stopping.
(CD Only )
[Program list recording]
After moving to the programmed list and
you can record it to USB. (CD Only )
3. Start the recording by pressing
4. To stop recording, press x.
MCD65,35_EVENT_ENG.indd 17 MCD65,35_EVENT_ENG.indd 17
Pausing recording
During recording, press
recording.
Press REC (R) to continue recording.
z
(Only Radio/ AUX/ TAPE)
To select recording bit rate and speed
1. Press z REC for longer than 3 seconds.
2. Use . m or M > to select the bit
rate.
3. Press z REC again to select the recording
speed.
4. Use . m or M > remote control
to select a desired recording speed.
X1 SPEED
- You can listen to music while recording it.
X2 SPEED
- You can just record the music fi le.
5. Press z REC to fi nish the setting.
The making of unauthorized copies of
copy-protected material, including computer
programs, fi les, broadcasts and sound recordings,
may be an infringement of copyrights and constitute
a criminal off ense. This equipment should not be
REC
z
Operation
REC (R) to pause
z
used for such purposes.
Be responsible
Respect copyrights
17
4
10. 07. 28 10. 07. 28 2:52 2:52