Selecting The Sound Enhancement (E.a.m.); Selecting The Sound Enhancement - Toshiba SD120/220 Owner's Manual

Advanced playback
Selecting the Sound Enhancement (E.A.M.*)
You can easily switch the sound enhancement to your preference.
*E.A.M.: Enhanced Audio Mode
DVD

Selecting the sound enhancement

VCD
CD
1
Press E.A.M.
The sound enhancement selection
E.A.M.
appears.
2
Select the sound enhancement by
pressing E.A.M. or
Each time you press the button, the sound
enhancement changes.
Normal:
Normal sound.
3D:
To obtain expansive virtual surround
sound effects from just two speakers.
Dialogue:
To control dynamic range to make
dialogues easier to hear (only when
playing a DVD video disc recorded
on the Dolby Digital recording
system).
• To use this enhancement on
sounds output from the
BITSTREAM/PCM AUDIO OUT
jack, be sure to set "Audio Out
Select" to "PCM".
40
/ .
51
To turn off the audio enhancement selection
Press ENTER.
Alternatively leave the DVD video
player unoperated for about 5
seconds after having made the
ENTER
selection.
Notes
• Actual effects to sounds may vary depending on the
speakers. Make the selection to your preference.
• Actual effects to sounds may vary depending on the disc.
• When the DVD video player is connected to an amplifier
equipped with Dolby Pro Logic Surround, select "Normal".
Otherwise, Dolby Pro Logic Surround may function
differently than usual.
• Selecting "Dialogue" disables "Dynamic Range Control"
function .
51
Spatializer ® 3-Dimensional Sound Processing provided by Desper
Products. Inc.
Certain audio features of this product manufactured under a license
from Desper Products, Inc., Spatializer
device are trademarks owned by Desper Products, Inc.
2
ENTER
1, 2
®
and the circle-in-square