To Stop Recording - Toshiba SD-V392SU Owner's Manual

To stop recording

Press STOP to stop recording.
" " will appear on screen for about
4 seconds.
To stop recording temporarily
Press PAUSE/STILL to avoid recording unwanted
material. Press again to continue the recording.
"
about 4 seconds.
Notes:
• The pause function will be released after 5 minutes to prevent
damage to the tape or the VCR. The VCR will change to the
STOP mode.
• You can select a recording channel in the recording pause
mode.
Recording one program while
watching another
While the VCR is recording, select your desired channel
on the TV.
When a TV is connected with an antenna cable only,
press TV/VCR to select the TV position.
The "VCR" display will go off and recording will continue.
Select the TV channel you want to watch by using the
TV channel selector.
Note:
Some CATV hookups do not permit viewing one channel
while recording another. See pages
2C53301C (E)p32-37
" will appear on screen for
and .
16 17
35
Auto Rewind feature
This VCR will automatically rewind the tape when the tape
has ended (except during OTR and timer recording). It will
also eject the tape.
21/4/04, 11:11
TV/VCR
PAUSE/STILL
STOP
35