Makita GA4043C Technical Information page 6

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -2. Armature, Spiral bevel gear [small one] (cont.)
ASSEMBLING
(3) Assemble Spacer, Armature section and Gear housing to Motor housing as drawn in Fig. 6.
Fig. 6
1. Set Switch knob to "Lock ON" position so that Switch plate is pushed toward Spacer.
Then, mount Spacer while fitting its groove to Switch plate.
And then, return Switch knob to "OFF" position.
2. Assemble Armature section to Motor housing
while fitting the wings of Brake shoe complete
to the grooves of Spacer.
Wing of
Brake shoe complete
Wing of
Brake shoe complete
4. Assemble Gear housing while facing Spindle to the same side
as the notch and Name plate.
Notch on
Gear housing cover
Name plate
Spacer Switch plate
groove
Groove of Spacer
Gear housing
Switch knob
3. Face the notch to the same side as Name plate
by twisting Gear housing cover.
Name plate
Spindle
Gear housing cover
Spacer
Notch on
Gear housing cover
P 6/ 14