1
2
1. Scabbard (chain cover)
2. Battery cover
MAINTENANCE
If you cannot cut the timber right through with a single stroke:
001743
Apply light pressure to the handle and continue sawing and
draw the chain saw back a little; then apply the spike a little
lower and finish the cut by raising the handle.
Carrying tool
Always remove the battery cartridge from the tool and cover
001744
the guide bar with the scabbard before carrying the tool. Also
cover the battery cartridge with the battery cover.
CAUTION:
•
Always be sure that the tool is switched off and the
battery cartridge is removed before carrying out any
work on the tool.
•
Always wear gloves when performing any inspection or
maintenance.
Filing saw chain
File the saw chain so that the cutters meet the specifications
indicated in illustration.
1. Top plate angle
3. Top filing angle
85˚
30˚
1
2
2. Side plate angle
4. Depth gauge
0.64 mm
60˚
3
4
001745
13