Rompa Snoezelen Double Bubble Bonanza Instruction Manual
Hide thumbs
Also See for Snoezelen Double Bubble Bonanza:
- Instruction manual (24 pages) ,
- Instruction manual (36 pages)
Subscribe to Our Youtube Channel
Related Manuals for Rompa Snoezelen Double Bubble Bonanza
Summary of Contents for Rompa Snoezelen Double Bubble Bonanza
- Page 1 Double Bubble Bonanza™ Instruction Manual Double Bubble Bonanza™ 22874, September 2018 Copyright ROMPA®Ltd...
-
Page 2: Table Of Contents
Contents Panel Overview Colour Description Technical Specification Dimensions Contents Compatible Rompa® Products Operation Modes Touch Screen Illuminated Push Buttons Patterns and Colours External Switches Microphone Input Rompa® Wireless Operation Installation Safety Care and Maintenance Troubleshooting... -
Page 3: Panel Overview
Panel Overview... -
Page 4: Colour
Colour The Panel is available in 4 colours: Black, White, Cream and Blue Description Control the bubbles and colours in each of the Double Bubble Bonanza™ chambers. Be amazed as bubbles dissipate in one chamber only to burst into life in the other. The panel is packed with sound effects and music which makes for a truly exciting multi-sensory experience. -
Page 5: Dimensions
Dimensions (All dimensions in mm) -
Page 6: Contents
18870 Talking Cube 20402 Mini Talking Cube 21917 WiFi Microphone 22871 Colour Command Centre™ 21918 WiFi Override Transmitter 21728 Rompa® WiFi App Control Box 22716 Rompa®Wifi Colour Control Bumpas – set of 8 22867 Wireless Colour Controller Cushioned Wall Mat... -
Page 7: Operation
Operation Modes The mode dictates how the panel behaves. The Double Bubble Bonanza™ has 3 modes which can be selected via the touch and an additional mode when one or two microphones are plugged into the ¼”/6.35mm microphone input Mode 1: Interactive The panel does not change current pattern or colour unless told to do so via the illuminated push buttons. -
Page 8: Touch Screen
Touch Screen The touch screen is intended for the supervisor of the session, not the primary user of the panel. The touch screen allows you to control in detail how the panel behaves as well as view statistics of panel usage. Upon booting the panel up it will revert to its default settings: Mode 1: Interactive Volume: 2... - Page 9 Volume Pressing the ‘+’ will increase the volume and pressing ‘-‘ will reduce the volume. Press the red forward or back buttons to cycle through the other menu options. Sound Effects Pressing the light green sound effect button will cycle the sound effects on or off. Sound effect refers to the sounds made when the user activates the illuminated push buttons.
- Page 10 Pressing the purple wireless button will cycle the panel wireless on or off. With wireless turned on the panel will respond to other Rompa® compatible wireless products. With wireless turned off it will ignore Rompa® compatible wireless products (Page 6).
-
Page 11: Illuminated Push Buttons
(Page 10, Lock setting). When using the Wireless setting (Page 10) it would benefit in keeping the same illuminating setting on while using other Rompa® products. Pattern The panel has 3 patterns which can be selected via the ‘Pattern’... - Page 12 Alternate Bubble Burst A burst of bubbles with the 1st chamber on, the other chamber turns bubbles off simultaneously. Then it turns opposite with chamber turn off and a burst of bubbles on the other chamber. This cycle is then repeats. Colour Multi-Coloured (LEDs are multi-coloured) All Colours Soft Fade (LEDs transition through colours)
-
Page 13: External Switches
External Switches The panel has 2 external switch inputs each located next to their associated illuminated push button. To connect the external switch simply plug into the ¼”/6.35mm jack and remove when finished (external switches without a ¼”/6.35mm may need an adapter fitting). Microphone Input The panel has 1 microphone input. -
Page 14: Rompa® Wireless Operation
Pressing the colour buttons turns both chambers to the corresponding colour selected. The panel will remain this colour unless a new colour is selected via the panel, a Rompa® wireless controller or the panel is in a passive mode where it continues cycling through colours and patterns after 60 seconds. -
Page 15: Installation
Due to the weight of the product it must only be installed onto walls of appropriate construction and with the appropriate fixings. This product is not suitable for fitting onto the Rompa® Panel Porter (22879). Recommended Tools ... - Page 16 (All dimensions in mm)
- Page 17 1. Lay the panel on its back ensuring the screen is facing upwards. Unscrew the 4 x M4 screws which secure the panel cover to the wall bracket. Please keep these in a safe place until required later. Next remove the framework from the TOP of the panel where the touchscreen locates, as shown the illustration below.
- Page 18 2. Remove the screws from the tank and then carefully remove the tank from the bracket. Place both the screws and the tank safely to one side as it will be required in step 5.
- Page 19 3. Person 1 will hold the bracket against the wall in place ensuring it is level, while the person 2 will need to mark the bracket position and screw positions as highlighted below. It is highly recommended that you use a minimum of 6 screws for mounting.
- Page 20 4. Drill a minimum of 6 x M6 holes in your marked screw positions Secure the bracket to the wall using wall plugs and M6 screws. Please note: fasteners are not supplied and must be purchased separately. Please ensure the correct fasteners are used dependant on the construction of the wall in question.
- Page 21 Recommend: Use Distilled water for long lasting performance. Pump Filling Rompa® strongly recommends the 20908 Bubble Tube Filling Pump as the quickest and safest way to fill and drain the tank. Refer to 20908 Bubble Tube Filling Pump instructions for a more comprehensive guide on using this product.
- Page 22 Manual Filling If you are filling the tank manually however use a funnel or similar to avoid any spillage of water and fill the tank from the top. Replace the tank lid. 8. At the top of the bracket connect the Orange Thin Humidity Outlet Pipe to the outlet valve at the top of the tank.
- Page 23 10. Position the bottom of the framework against the bottom of the bracket as shown below. Connect all 3 cables from the bracket to the electronic board inside the framework. The electronic board is behind the touchscreen display. Connect the 3 different sized cables in the order shown below. As they are different sizes, they will only connect to each other in one way.
- Page 24 11. Before you plug into the mains, test the panel’s set up: a. Water level – is there a gap of 50mm/2 inch at the top of the tank? If not, adjust the water level allowing a 50mm/2 inch gap. b.
- Page 25 13. Secure the cover with the 4 x M4 bolts saved from earlier.
-
Page 26: Safety
If the product generates abnormal sounds, burning smell or smoke disconnect immediately and contact Rompa® customer services. Do not press and hold the panel push buttons for durations of longer than a minute. Over time this may reduce the life expectancy of the... -
Page 27: Care And Maintenance
Ensure no sharp tools or objects are near to the screen. Rompa® recommends to use a soft microfibre cloth for cleaning and dusting. It optimises the finish and will prevent scratches onto the screen. Slightly dampening the cloth or use of isopropyl alcohol is recommended for more stubborn stains. -
Page 28: Troubleshooting
2 and Sound Effects set to on. If troubleshooting does not solve the issue please contact Rompa® Customer Services +44 (0) 1246 211 777 Frozen or Turn the panel off and wait 10 seconds. Turn the panel back on.
Need help?
Do you have a question about the Snoezelen Double Bubble Bonanza and is the answer not in the manual?
Questions and answers