Auto Power Off; Volume Control - VTech KidiStar Dance Parents' Manual

• Do not short-circuit the coin battery terminals.
• Remove exhausted coin battery from the product.
• Remove coin battery during long periods of non-use.
• Do not dispose of coin battery in fire.
• Do not charge a non-rechargeable coin battery.
• Rechargeable batteries are to be removed from the toy before being
charged. (if removable)
• Rechargeable batteries are only to be charged under adult supervision.
TO BEGIN USING KIDISTAR DANCE
Power On
Press the On/Off Button to turn on the main unit. If you've just taken
the Kidi Star Dance™ system out of its packaging for the first time,
you need to disable Try-Me mode before playing. Press the OK Button
during the Try-Me movie to exit Try-Me mode.
Band Pairing
After exiting the Try-Me mode, you will be asked to pair
the Bands before playing for the first time. Turn on your
Bands and press the OK Button to start the pairing
procedure. Shake the Band that you want it to be paired
as Band A first, and then shake the other Band to be
Band B.
If the main unit cannot recognize the Bands during pairing, power off the
Bands, turn them on and shake again.
NOTE: If for any reason you want to pair only one Band, after Band A is
paired, you can press the OK Button to skip Band B pairing.

Auto Power Off

To preserve battery life, the Kidi Star Dance™ system will automatically
shut down if there is no operation for a short period of time.

Volume Control

Press the Volume Button and press the Left or Right
Buttons to adjust the volume.
NOTE: Audio-in volume is not controlled by the Kidi Star Dance™
system, please use the connected music device to control the audio-in
volume.
7