Insert SIM card & micro SD card 1. Take out the SIM card slot as shown below; 2. Put the nano SIM card and micro SD card into the SIM card slot; 3. Insert the SIM card slot back into the phone. Important Notes: The nano SIM card is a small SIM card.
Key Functions Keys Function Hold down to power on your phone. Press to switch to sleep mode. Press to wake up. Power Key Hold down for Power off, restart or screenshot function options. Back Press to go to the previous screen. Press to exit applications.
Charge your Battery Insert the charger lead carefully. Ensure the plug is inserted with the correct orientation. Don’t force the connector into the charger jack(USB Port). Disconnect the charger when fully charged. When the phone is on the charging, icon is shown on the status bar.
Connect to a Wi-Fi Network Use a local Wi-Fi network to download data instead of using your network data. Go to Settings >Network & Internet >Wi-Fi, touch it and switch on, and then touch a network to join. If the network is secured you need to know the password. Wi-Fi passwords are case sensitive so enter exactly as it is written.
Change your Ringtone and other Audio Settings Go to Settings > Sound to set notification sound, Vibrate mode etc. Phone Status Icons GPRS network No Signal EDGE network Signal strength (no data) Signal strength (data 3G 3G network ready) 4G network Mobile data in use Flight mode Ringer off...
Notification Icons New SMS microSD card not mounted New MMS microSD card removed New Email Upcoming event New Gmail message Call on hold New Hangouts New Wi-Fi network detected message SMS or MMS issue Downloading data Missed call Uploading data Call in progress USB tethering is on USB connected...
Options during a call Press to open the number pad Press to use loudspeaker(Hands-free) mode Press to mute the microphone Press to put the current call on hold Press to End the call When you receive a phone call The display shows the caller ID and any additional information about the caller saved in Contacts.
Reply to a Message Messages you receive are appended to existing threads of the same number. A new thread is created for new numbers. On the Messages interface, touch the thread that has the message you want to reply to. Type your reply in the text box at the bottom.
Page 11
Trademark Hot Pepper and the Hot Pepper logos are trademarks of Hot Pepper, Inc.. Google, Android, Google Play and other marks are trademarks of Google LLC. More Information ● General support are available at www.hotpepperusa.com ● Call Hot Pepper hot line at 1 (855) 737-7377 (1-855-PEPPERS)
FCC Regulations This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 13
● Reorient or relocate the receiving antenna. ● Increase the separation between the equipment and receiver. ● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ● Consult the dealer or an experienced radio/TV technician for help.
Page 15
Hearing aid compatibility (HAC) regulations for mobile phones In 2003, the FCC adopted rules to make digital wireless telephones compatible with hearing aids and cochlear implants. Although analog wireless phones do not usually cause interference with hearing aids cochlear implants, digital wireless phones sometimes do because of electromagnetic energy emitted by the phone's antenna, backlight, or other components.
Page 16
The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types One Touch L100G (FCC ID: ) has also been tested against this SAR 2APD4-A81C limit. The highest SAR value reported under this standard during product certification for use when properly worn on the body is W/kg and for head is W/kg.
Need help?
Do you have a question about the HPP-GS1 and is the answer not in the manual?
Questions and answers