After Each Use - Remington PG180 Manual

ENGLISH

AFTER EACH USE

• Rinse the accumulated hair from the cutters and shake off excess water.
• Alternatively, use a brush.
• Gently tap on a flat surface to remove hair particles and brush the remaining hairs away.
• Place one or two drops of cutter oil or sewing machine oil on the blades.
Turn the clipper on to distribute the oil evenly, wipe off any excess oil.
• Wipe the main unit with a damp cloth and dry immediately.
• Note: Ensure that the groomer is turned off when applying the oil or rinsing under the
tap.
RECYCLING
W
6
To avoid environmental and health problems due to hazardous
substances, appliances and rechargeable and non-rechargeable
batteries marked with one of these symbols must not be disposed of
with unsorted municipal waste. Always dispose of electrical and
electronic products and, where applicable, rechargeable and
non-rechargeable batteries, at an appropriate official recycling/
collection point.