Selecting Digital Audio Output - Toshiba SD-2715 Owner's Manual

PAGE 38 INITIAL SETTINGS

Selecting Digital Audio Output

Each DVD disc has a variety of audio output
options. Set the player's Digital Audio Output
according to the type of audio system you use.
1, 2
Playback
Stream/PCM
Disc
96 kHz
PCM
Linear PCM
DVD
DTS DVD
DTS bit Stream
Dolby Digital
Dolby Digital
DVD
bit Stream
MPEG DVD
MPEG bit Stream
Audio CD/
PCM
Video CD
DTS Audio CD
DTS bit Stream
2
OUTPUT
Dolby Digital/ PCM only
PCM
PCM PCM
DTS bit Stream DTS bit Stream
Dolby Digital PCM
bit Stream
PCM PCM
PCM PCM
DTS bit Stream DTS bit Stream
At the SETUP screen, press
1
Digital Audio Output and press
Disc Audio
Disc Subtitle
Disc Menu
Rating
Password
TV Aspect
Menu Language
Progressive
Digital Audio Output
5.1 Speaker Setup
Others
2
D D E E
Press / to select the desired output and
press ENTER.
You can select Digital Audio Output or Sampling
Frequency item by pressing ENTER.
I
Digital Audio Output
DOLBY DIGITAL/PCM:
an active digital output is supplied to a Dolby Digital decoder,
(or an amplifier or other equipment with Dolby Digital
decoder).
Stream/PCM:
Select "Stream/PCM" if an active
digital output is supplied to an amplifier or other
equipment with DTS decoder, Dolby Digital decoder and
MPEG decoder.
PCM:
Select "PCM" if an active digital output is
supplied to an amplifier or other equipment with linear PCM
only (or MD recorder or DAT deck).
I
Sampling Frequency
To change the Sample Frequency setting, first select the
desired digital audio output type as indicated above.
If your A/V receiver or surround processor is NOT capable of
handling 96kHz signals, select the 48kHz option. When this
choice is made, this unit will automatically convert any 96kHz
signals to a 48kHz output so that your system is capable of
decoding them.
If your A/V receiver or surround processor is capable of
handling 96kHz signals, select the 96kHz option. When this
choice is made, this unit will pass each type of signal through
without any further processing.
Notes
❍
When you are not using the player's digital audio output, don't
select any of the options.
❍
If an active digital audio output signal is supplied to a receiver or
other equipment without a corresponding digital decoding capa-
bility, a very loud noise may be produced which could
permanently damage the speakers.
❍
The DTS DVD disc sound is played back only when the DVD
player is connected to a receiver with a DTS decoder.
D D E E
/ to select
G G
.
DOLBY
/PCM
DIGITAL
Stream/PCM
PCM
Sample Freq.
48 KHz
96KHz
Select "DOLBY DIGITAL/PCM" if