Pausing A Tv Broadcast To Resume Later - Toshiba RD-XS30B Owner's Manual

Playback
HDD

Pausing a TV broadcast to resume later

This function enables you to pause a TV broadcast and resume viewing at a later, more convenient time,
by storing the TV broadcast temporarily on the HDD.
FRAME
TIME BAR
PICTURE SEARCH
SLOW
Notes
• This function is not available during recording.
• While using this pause TV recording, reverse slow-motion playback and reverse frame by frame playback are not available.
• Pause TV recording stops when the HDD is filled up. It will not begin if the HDD is full.
• While using this pause TV recording, you cannot programme the recorder.
• Pause TV recording does not start to work automatically at turning–on of the power. Every time you want to use this function,
perform the steps 1 to 4 above.
1
While viewing a TV broadcast via this recorder,
press TIMESLIP.
The current picture pauses.
The recorder begins to store the broadcast on the HDD
TIMESLIP
the moment you press the TIMESLIP button.
2
Resume playback by pressing PAUSE or PLAY.
• You can confirm how far you are from the current
PAUSE
broadcast by pressing the TIME BAR button.
• Resume playback may not start immediately after you
press the PLAY or PAUSE button.
PLAY
3
Locate a scene you want by the following
methods.
Fast-forward/fast-reverse:
Press the PICTURE SEARCH button.
Slow-motion:
Press the SLOW
Forward frame by frame play:
First press the PAUSE button then press the FRAME
• To resume normal playback, press the PLAY button.
• You can play in fast-forward to within 10 seconds prior to the
current broadcast. To view the current broadcast, press the
TIMESLIP button to exit this playback mode.
4
Press TIMESLIP to exit this mode.
The recorder stops storing the broadcast on the HDD.
A message appears and asks you whether you will save
the stored data or erase it.
TIMESLIP
Press the
button.
button.
/ buttons to select, then press the ENTER
button.
55