Gigaset T640 PRO Installation Manual page 9

Activating the phones
After the initial configuration, you must enter the PBX users, set up extensions and assign them
to the phones. This is done via the Administration menu of the user interface.
¤
Start the Web browser
administrator.
The PBX automatically detects the following Gigaset phones connected to it or to the network:
Gigaset DE900 IP PRO
Gigaset DE700 IP PRO
Maxwell 10
Polycom IP5000/6000/7000 conference phones are also supported.
More information: https://teamwork.gigaset.com/gigawiki/display/GPPPO/
FAQ+T640+T440+Polycom+device+provisioning
Detected phones are shown under:
¤
Administration
The phones are given temporary extension numbers (950001, etc.).
Setting up user IDs and assigning extensions
¤
Administration
¤
Set up an ID for each user and assign them an extension number and PIN each.
User IDs can also be imported from a CSV file.
¤
Administration
Activate the extension on the phone
¤
Enter followed by the extension number (e.g.
Pick up the handset and wait for the instruction
(e.g.
or
Enable phones from the Administrator menu
¤
Administration
For a detailed description of the Administrator menu, see the
Gigaset T440 PRO / Gigaset T640 PRO Administrator Guide.
Enter the IP address of the PBX in the address field
Gigaset DE410 IP PRO
Gigaset DE310 IP PRO
Maxwell 3
Provisioning Phones
Users & extensions
Users & extensions
) . . . the phone is registered on the PBX with the extension
Provisioning Phones
Gigaset N510 IP PRO
DECT Muliticell System Gigaset N720 IP PRO
Maxwell basic
Users & groups Users
Users & groups
for the extension 12)
Enter the PIN followed by
Startup
Log on as
User import
7