Step 5: Powering On; Step 6: Setting Up The Player; A: Language - Toshiba HD-A3KC Owner's Manual

Preparation (continued)

Step 5: Powering on

1
Turn on the TV or monitor, and select the input
which the player is connected to.
2
Press ON/STANDBY.
ON/STANDBY button

Step 6: Setting up the player

Make the settings which are necessary to operate the player.
To move a cursor
To enter the
selected item
To return to the
previous menu
To input digits
Start
To display the
setting menu
18
_ H D - A 3 K U _ E n g . i n d d 1 8
ON/STANDBY button
ON/STANDBY indicator
1
Make sure that the following menu is displayed.
(If not, press SETUP to display it.)
SETUP MENU
Picture
Audio
Language
Ethernet
General

A: Language

2
Press / to select "Language", then press OK.
SETUP MENU
Picture
Audio
Language
Ethernet
General
3
Press / to select "On Screen Language", then press OK.
Disc Menu Language English
Subtitle Language None
Audio Language English
On Screen Language English
4
Press / to select the language you want use for on-screen displays,
then press OK.
5
Press RETURN or
When the power turns on, ON/STANDBY indicator on the
front panel changes color from red (standby mode) to blue
(operation).
Start up (and disc loading (
When you power on this player for the fi rst time, the setting
menu will appear. Go to Step 6 to make the necessary
setup.
To power off the player
Press ON/STANDBY.
Disc Menu Language
Subtitle Language
Audio Language
On Screen Language
On Screen Language
English
French
German
Spanish
Italian
to return to the menu of step 1.
page 24)) may take time.
English
None
English
English
7 . 8 . 2 4 : 4 : 1 P M