Toshiba PDR-T20 Instruction Manual page 57

Copying Images to This Camera
You can process images photographed with this camera on the PC and then send them
back to the camera. You can also make copies of images other than those
photographed with this camera.
Connect this camera to the PC using a USB cable.
ACDSee TM is automatically started.
Select an image to be copied, then select "Copy to Camera."
Select a post-conversion image size, then click "OK."
Resultant image sizes differ depending on the original sizes of images to be copied.
More than 640 x 480
640 x 480 or smaller
Notes
• With "Do not resize" selected, this camera may not properly display images, depending on
their sizes.
• Images copied from a Macintosh to this camera do not allow image list display (Thumbnail
Display) no matter which size is selected. This attributes to a relational issue with a
Macintosh and does not designate malfunction.
• For details of ACDSee
• Images taken on other camera types and copied to this camera sometimes cannot be displayed.
When using a Macintosh, drag and drop an
image to be copied onto copy destination
folder. After a confirmation message
appears, select "Yes."
The image is named "ACDSXXXX.jpg" and
is copied to the XXXACDSE folder on the
SD card in the camera.
When copies are made, images are always
converted to 640 x 480-pixel images.
Images are copied with the original sizes
unchanged.
: The image will be converted to 1024 x 768 size.
For an image smaller than 1024 x 768, it will be
surrounded by a black frame in Windows and
enlarged in Macintosh.
: The image will be converted to 640 x 480 size.
For an image smaller than 640 x 480, it will be
surrounded by a black frame in Windows and
enlarged in Macintosh.
TM , consult its Help.
57