Loading And Unloading The Battery - Toshiba PDR-T20 Instruction Manual

Loading and Unloading the Battery

This camera must be used with dedicated rechargeable lithium-ion battery (PDR-BT3).
This battery is merely called battery in this Instruction Manual. You cannot use other types
of battery. Charge the battery before using the camera.
Before starting
Confirm that the power of the camera is off. Removing the battery with the power on
could cause malfunction and/or damage the saved image data.
Open the battery/SD card cover.
Insert the battery in the correct orientation shown.
Close the battery/SD card cover.
To remove the battery
Open the battery/SD card cover and then release the battery lock lever. After the
battery is slightly ejected, pull out the battery slowly.
Slide the battery/SD cover in the arrow direction 1 ,
1
then open it 2 .
2
Tilt the battery lock lever toward the touch panel and
then insert the battery with care that the orientation of
the arrow on the battery's label matches the arrow on
the camera.
Battery lock lever
You should insert the battery as far as they go.
Close the battery/SD card cover 1 , then slide it in
2
the arrow direction 2 .
Make sure that the cover is firmly closed.
1
19