Advertisement
4629 Schools cc wc instruction:4154 space cc wc suites.qxd
OUTLET CONNECTOR TO WASTE PIPEWORK
Fit outlet connector to waste pipework,
(Fig. 5), (not supplied), ready to take
closet. The closet will have to be removed
from its marked position for this to be
done.
outlet
connector
110 OD
waste pipework
Fig. 5
Armitage Shanks
Armitage, Rugeley,
Staffordshire.
England. WS15 4BT.
Telephone: 01543 490253
Fax: 01543 491677
01/03/2008
16:11
Page 1
Reposition
closet
into
position
previously marked on floor making connec-
tions to both flush pipe and waste pipe.
Ensure both connectors are pushed home
fully, the cistern may have to be lifted
slightly to aid ease of fitting.
Screw closet to floor, (screws not
supplied).
Connect float-operated valve to
pipework and test. Ensure that the water
level in cistern is correct.
CUSTOMER CARE HELPLINE
0870 1296085
CUSTOMER CARE FAX LINE 01482 499611
email: ukcustcare@IdealStandard.com
We pursue a policy of continuing improvement in design
and performance of our products. The right is, therefore,
reserved to vary specifications without notice.
Ideal Standard (UK) Ltd.
4629 03/08
EEM34462967
CONTOUR 21
CLOSET SUITES
Installation Instruction
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Armitage Shanks CONTOUR 21
Summary of Contents for Armitage Shanks CONTOUR 21
- Page 1 Fit outlet connector to waste pipework, Reposition closet into position CONTOUR 21 (Fig. 5), (not supplied), ready to take previously marked on floor making connec- closet. The closet will have to be removed tions to both flush pipe and waste pipe.
- Page 2 4629 Schools cc wc instruction:4154 space cc wc suites.qxd 01/03/2008 16:11 Page 3 TECHNICAL INFORMATION INSTALLATION Position closet bowl (Fig. 2) and mark fixing screws fixing centres the outline of the closet bowl on the floor. flush support brackets valve Lower the empty cistern onto the rear of the bowl, keeping cistern against the seal...
Need help?
Do you have a question about the CONTOUR 21 and is the answer not in the manual?
Questions and answers