Photography (Auto Photography) (continued)
Set the mode dial to [
Look at the image on the LCD monitor to compose the picture.
To adjust the brightness of the LCD monitor
Press the shutter button down half way 1 , and press
it down fully 2 .
• Pressing the shutter button down half way adjusts the exposure,
and pressing the shutter button down fully takes the shot.
• When the focus and exposure are adjusted, the viewfinder lamp
lights or blinks in green. (
• If you shoot a picture, when preview is set to ON (
preview image is displayed on screen for about two seconds.
• The viewfinder lamp turns red while image data is being recorded
onto the SmartMedia™.
Memo
•The LCD monitor sometimes displays bright, dark or colored spots at all times. This is not a malfunction.
These spots do not appear in the photographed image.
•The image is not displayed on the LCD monitor while the shutter button is pressed down fully.
].
Page 84
Page 39)
Page 60), a
- 42 -
Press down
1
half way.
Press down
2
fully.