Operating Instructions; Manual Operation; Reject; Stop - Garrard 210 Operating Instructions Manual

Operating Instructions
To operate proceed as follows:
(1) See that correct stylus is in position for type of record to be played.
(2) Move speed change control to desired speed.
(3) Place records horizontally on record spindle, lift and move overarm inward.
(4) Switch on by moving the Automatic Control to "on."
To unload:
(1) Lift overarm, move to right hand side and lower.
(2) Lift records off spindle, if replaying the same records, lift clear of spindle before
replacing.
Manual operation:
(1) Place record on turntable by threading over record spindle, moving record horizontally
over step on spindle.
(2) Switch on by moving Manual control to "on." On completion of playing the record,
the pickup will return to its rest and the motor switch off.
Reject:
A record being played may be rejected by moving the Automatic control to "Reject."
Stop:
The changer automatically stops on completion of playing the records placed on it. If it
is desired to stop while playing a record, move the manual control to "Off," the motor
will then stop with the pickup remaining on the record. Restart by moving the manual
control to "On" and the same record will continue playing. To stop for a period, move the
Automatic control to "Off," the pickup will then return to its rest and the motor switch off.
The pickup arm may be locked on its rest by moving the pickup arm locking lever to the
left. It is automatically disengaged when switching on either Automatic or Manual.
Page Three