Maintenance And Service; Accessories, Tools; Environment - Festool HL 850 E Original Instructions Manual

Maintenance and service

Any maintenance or repair work
that requires opening of the motor or gear hous-
ing should only be carried out by an authorised
Customer Service Centre (name supplied by your
dealer)! Maintenance or repair work carried out
by an unauthorised person can lead to the wrong
connection of the power cord or other components,
which in turn can lead to accidents with serious
consequences.
To prevent accidents, always re-
move the plug from the power supply socket before
carrying out any changes or maintenance work on
the tool! Do not use compressed air to clean the
electrical tool! Do not try to clean parts inside the
tool in this way, as you could let foreign objects in
through the openings of the tool housing.
Certain cleaning agents and sol-
vents are harmful to plastic parts. Some of these
include, but are not limited to: Gasoline, Acetone,
Methyl Ethyl Ketone (MEK), Carbonyl Chloride,
cleaning solutions containing Chlorine, Ammonia,
and household cleaners containing Ammonia.
If the power cord is damaged, the cord must be re-
placed at manufacturer or service workshops.
The planer plate is made of a high-quality mag-
nesium alu minium alloy. Any corrosion which may
occur can be removed by buffing using a fine elastic
fibre mat „V lies quality" (grit S800). To prevent cor-
rosion of the chromated planer head any cleansant
used must have a pH value of between 4.5 and 8.
Keep the ventilation slots in the motor housing clean
and free of obstructions at all times to ensure an
adequate circulation of air.
The planer is fitted with special motor brushes with
an automatic cut-out. When the brushes become
worn the power supply is shut off automatically and
the planer comes to a standstill.
To clean the chip collection opening:
– Remove the adapter AD-HL (7-5) (if applicable).
– Empty the adapter AD-HL, remove any obstruc-
tions.
– Remove any chips jammed into the chip collection
opening, if necessary clean the machine with a
resin solvent.
– In case of extreme contamination, remove the
planer head (chapter Planer heads and spiral
cutters) to clean the opening leading to the chip
ejection.
– Attach the dust extractor and vacuum the chip
ejection openings.
Customer service and repair only
through manufacturer or service
workshops: Please find the nearest
address at: www.festoolusa.com/
service
Use only original Festool spare parts!
EKAT
4
Order No. at: www.festoolusa.com/service
5
3
2
1

Accessories, tools

For safety reasons, only use
original Festool accessories and tools!
Use only original Festool accessories and Festool
consumable material intended for this machine.
These components are designed specifically for
this machine. Using accessories and consumable
material from other suppliers will most likely affect
the quality of your results and limit warranty claims.
Machine wear or your own personal workload may
increase depending on the application. Protect your-
self and your machine, and preserve your warranty
claims by always using original Festool accessories
and Festool consumable material!
Three rustic planer heads are also available as acces-
sories. The planer head HK 82 RG provides a coarse
rustic texture and the HK 82 RF a fine rustic texture.
The planer head HK 82 RW provides an irregular
undulated surface. All rustic planer heads can only
be fitted with the HSS spiral cutters provided for this
purpose. No interchange is possible.
The accessory and tool order number can be found
in your Festool catalogue or on the Internet under
www.festoolusa.com.

Environment

Do not dispose of the device as domestic waste!
Dispose of machines, accessories and packaging
at an environmentally responsible recycling centre.
Observe the respective national regulations.
11