Connecting An A/V Receiver - Toshiba CN36Z71 Owner's Manual

Connecting an A/V receiver

If you use a system that delivers Dolby Pro Logic* surround sound,
you will probably want to use the TV speakers as center channel
speakers.
A center channel speaker adds to the realism of a surround sound
system such as Dolby Pro Logic.
You will need:
• one pair of audio cables
• one video cable
• one audio cable for audio center channel
To A/V receiver
Center
From
Antenna out
ANT( 75 )
ANT-1 OUT ANT- 2
ON OFF
Connection example of Dolby Pro Logic surround system
Audio
VCR
Video
Left
speaker
Surround
speaker L
Video TV
out in
AUDIO CENTER
OUT
VAR
CHANNEL IN
S-VIDEO
AUDIO
R L
VIDEO VIDEO
ON OFF
Y
L/
L/ MONO
C
B L
MONO
AUDIO
AUDIO AUDIO
R R R
C
R
COLOR
STREAM AUDIO
VIDEO-1 VIDEO-2
INPUT
IN DVD IN OUT
Video
LDP/DVD
Audio
A/V receiver
T V
Right
speaker
Surround
speaker R
10
Caution:
Make sure the TV is turned off before
connecting or disconnecting an audio cable to
the Audio Center Channel IN jack.
The speaker may be damaged.
Note:
Refer to the instructions furnished with the
connected A/V receiver for detailed surround
system.
When the Audio Center Channel ON/OFF
switch is in the ON position, the TV speakers
will function only as the center channel
speakers.
Adjust the volume for center channel
speakers with the center level control on the
A/V receiver.
If you use the TV speakers as normal
speakers, set the Audio Center Channel
ON/OFF switch to the OFF position.
* "Dolby Pro Logic" is a trademark of Dolby
Laboratories Licensing Corporation.