Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Partizan NVH-3252 PRO
Summary of Contents for Partizan NVH-3252 PRO
- Page 1 NVH-3252 PRO video recorder short user manual WWW.PARTIZAN.GLOBAL 2019...
-
Page 2: Table Of Contents
Partizan NVH-3252 PRO video recorder short user manual This manual is a quick guide to Partizan NVH-3252 PRO video recorder configuring, setting the parameters and getting started with the device. Content: 1. Partizan NVH-3252 PRO video recorder description, ports / connectors assignment, equipment - page 2 2. - Page 3 1. Description Partizan NVH-3252 PRO Digital Video Recorder is meant to record video streams from IP CCTV cameras to internal SATA drives. This recorder has such SMART functions as “Face Detection” and “Perimeter Intrusion Detection”. Recording modes - manually / on alarm / by motion / scheduled. Number of channels - 32.
-
Page 4: Preparation For Work
2. Preparation for work 1. Get the device out of the box. Remove the top cover by unscrewing the two screws with a Phillips Ph2 slot screwdriver (mounting screwdriver is not included). 2. Fix the HDD / SSD to the transverse mounting plate. Maximum number of SATA - up to 8 pcs. 3. -
Page 5: Getting Started, Basic Steps
3. Getting started Plug the 250V / 10A power cable into a power socket and press the ON / OFF button on the rear panel of the device. Wait for the “Startup Wizard” menu to appear on the screen. Caution! Observe safety precautions when working with an electric network of 220 V. - Page 6 Network configuration is required and can be accomplished by entering numerical data in all fields - IP address / Subnet mask / Gateway / DNS1 / DNS2. QR code of Partizan MAC. It’s meant to quickly add a DVR to smartphone / tablet by scanning QR code by mobile device.
- Page 7 Step 3 – USER Adding users or groups: Using the "Wizard" you can manage users and user groups by assigning user rights. You can also set a new password in this menu by selecting the Modify Password option.
- Page 8 Assigning the rights to a new user. The administrator can assign rights to a new user If “Add User” option was selected in the previous “Wizard” menu. New password can also be set by selecting the Password option in this menu.
- Page 9 Step – 4 SMART Work with SMART-functions. SMART-functions may be assigned to any of 32 channels. You can turn off SMART (None), or activate special modes - automatic face detection (Face) and detection of intrusion into a set zone (Perimeter). Please note that Face mode can be enabled only in one channel and Perimeter mode can be set for not more than two channels.
-
Page 10: Main Menu
4. Main Menu To enter the Main Menu, you need to right-click in any part of the split screen. A mini-window for quick access to device modes and functions will appear. Left-click on the "Main Menu". The "Main Menu" contains three main sections: •... -
Page 11: Operation Section
5. OPERATION The OPERATION section contains tools: - SEARCH - BACKUP - SHUTDOWN SEARCH window Interface The line on top displays the video viewing modes - Normal, Event, Tag, SMART, External, Face. The central part - split screen. Top right corner - calendar (with archived video records). Below - timeline of the archived video recording. - Page 12 BACKUP tool The BACKUP tool is assigned to work with video records that have been stored on external drives - USB Flash / HDD / SSD. To find these drives click on the "Detect" button. SHUTDOWN Tool The Shutdown tool allows you to perform one of three actions - exit the “Main Menu” (Menu Logout), turn off the video recorder (Shutdown) or reboot it (System Reboot).
-
Page 13: Info Section
6. INFO Section The INFO section (Information) contains the following tools: - SYSTEM (System Information) - EVENT - NET (Network) - LOG (The event log) - Page 14 SYSTEM tool It displays the status of the system and of the HDD / SSD drives, information about the current version of the system.
- Page 15 EVENT tool The EVENT tool stores information about all incidents - sensors triggering, network conflicts and video recorder failures. This information is presented for each channel for more clarity.
- Page 16 NET tool The network activity is graphically displayed here on each channel from 1 to 32 - a graph of the current traffic indicating the bitrate of the video streams.
- Page 17 LOG tool All actions of all users (including the Administrator) are displayed in the event log, as well as information on alarms, changes in the device configuration, settings, etc. To view these events you must set data in the "Type", "Start Time" and "End Time" fields.
-
Page 18: Config Section
7. CONFIG Section CONFIG section (Settings) contains the following tools: - CHANNEL - NETWORK - EVENT - STORAGE (HDD / SSD drives) - SYSTEM - APP (Additional Features) CHANNEL tool CHANNEL tool is used to check and change the channel parameters - channel name, type, protocol, video coding, SMART function management, operation mode, etc. - Page 19 NETWORK Tool NETWORK tool is assigned to configure the network. It contains basic and advanced parameters settings.
- Page 20 EVENT tool EVENT tool is assigned for controlling alarm inputs / outputs, as well as for setting up reactions to alarm signals - whether to take a snapshot or to send an e-mail or to upload to cloud storage, etc.
- Page 21 STORAGE tool STORAGE tool is intended to manage HDD / SSD storage devices, setting the recording mode and recording schedule (by days of the week).
- Page 22 SYSTEM tool SYSTEM tool includes the basic system settings (setting time, date, language, etc.), user interface themes, display and screen resolution selection, working with tours, automatic restart scheduler, single user and user group accounts, COM port settings (RS232), etc.
- Page 23 APP Tool APP tool is designed to work with additional features - external services, systems, mail services, cloud storages, for Dynamic DNS configuration, etc.
-
Page 24: Ptz Mode
8. PTZ mode PTZ CCTV camera remote control mode. To enter the PTZ mode you need to move the mouse cursor over the active camera window on the split screen and right-click there. Then select the PTZ line in the shortcut list. -
Page 25: Color Setting Mode
9. Color Setting Mode This remote control mode of the CCTV camera settings includes settings of Brightness / Contrast / Shade / Saturation / Sharpness. To enter the mode, you need to right-click on the window of the active CCTV camera on the . -
Page 26: Search Mode
10. Search Mode This mode is for searching videos in the archive and viewing records. To enter the mode, you need to right-click on the window of the active CCTV camera on the . Then select the line “Search” in the context menu bar. split screen The interface of the “Search”... -
Page 27: Record Mode
11. Record mode This mode is to select a recording mode for each channel. To enter into this mode, you need to right-click on the window of the active CCTV camera on the . Then select the line split screen “Record”... -
Page 28: Ip Channel Mode
12. IP Channel Mode This is IP channels setting mode. To enter the mode, you need to right-click on the window of the active CCTV camera on the . Then select the line “IP Channel” in the context split screen menu bar... -
Page 29: Channel Reset Mode
13. Channel Reset Mode It is an active window reset mode. To enter the mode, you need to right-click on the window of the active CCTV camera on the . Then select the line “Channel Reset” in the context split screen menu bar... -
Page 30: Bottom Toolbar
14. Bottom toolbar This toolbar appears when you hover over the bottom of the screen. It serves for quick access to some settings and modes of the video recorder. The panel contains the following elements that activate certain modes and settings (from left to right): 1 - Main menu (see page 7) 2 - Split Men 3 - Screen selection from 4 to 9 - split screen view (1, 4, 9, 16, 25, 32 windows)