Using The Remote Control; Preparing The Remote Control For Use; Installing The Remote Control Batteries - Toshiba 32A32 Owner's Manual

Using the remote control

Preparing the remote control for use

Your TV remote control can operate your TV and most VCRs and cable TV converters, even if they are different brands.
If you have a Toshiba VCR or cable TV converter:
Your TV remote control is already programmed to operate it. See page 12.
If you have a non-Toshiba VCR or cable TV converter:
You must first program your remote control so it will operate the other equipment. See pages 12–14.

Installing the remote control batteries

1
Slide the battery cover off the back of the remote control.
Press and slide to remove.
2
Install two "AA" size batteries, making sure to match the + and –
signs on the batteries to the signs on the battery compartment.
3
Slide the battery cover back onto the remote control until the lock
snaps.
Caution:
Dispose of batteries in a designated disposal
area. Do not throw batteries into a fire.
Do not mix battery types or combine used
batteries with new ones.
Remove dead batteries immediately to prevent
battery acid from leaking into the battery
compartment.
If you do not intend to use the remote control
for a long time, remove the batteries.
Note:
If your Toshiba TV remote control does not
operate all of the features of your VCR or cable
TV converter, use the original remote control
for your other equipment.
10