Programming The Remote Control - Toshiba 30HF83 Owner's Manual

Programming the remote control

Your Toshiba TV remote control is preprogrammed to operate most
Toshiba devices. To program your TV remote control to operate a
non-Toshiba device or a Toshiba device that the remote control is not
preprogrammed to operate, follow the steps below. For details on
using the remote control to operate the device, see page 18.
1. In the remote control code table (below and on the next page),
find the code for your device. If more than one code is listed, try
each one separately until you find one that works.
2. Set the Device Switch to the type of device you are programming
the remote control to operate — CBL/SAT (for a cable converter
box or satellite receiver), VCR (for a VCR or TV/VCR combo),
or DVD (for a DVD player or HTIB [home theater in a box]).
3. While holding down RECALL, press the Channel Number
buttons to enter the 3-digit code for your device.
4. To test the code, turn on the device, point the remote control at
it, and press POWER.
• If the correct code was entered, the device will turn off.
• If the device does not respond, repeat steps 1 – 4 using
another code.
• If the device does not respond to another code, you will need
to use the remote control that came with the device.
Note: In addition to POWER, confirm that all necessary keys on the
TV remote control operate your device. If some keys are not
operational, repeat the device code setup using another code (if other
codes are listed for your device). If, after trying all listed codes, the
necessary keys do not operate your device, use the device's original
remote control.
5. Remember to set the Device Switch back to TV to control the TV.
6. For future reference, write down the code(s) you used:
DEVICE
Remote control codes
In some cases you may not be able to operate your device with the TV
remote control. Your other device may use a code that is not
recognized by the TV remote control. If this happens, you will need
to use the remote control provided with the device.
Hitachi: 062, 095, 096
Cable box
Jasco: 097
ABC: 061, 062, 063,
Jerrold: 062, 069, 071,
082, 084, 087, 091,
082, 086, 089, 091,
092, 096, 098
096
Archer: 065, 092, 097,
Magnavox: 072, 096
099
Memorex: 091, 092, 104
Cableview: 064, 094
Multi Canal: 090
Century: 092
Novavision: 101
Citizen: 090, 092, 097
Panasonic: 081, 083, 085
Contec: 083, 085, 086,
Philco: 087
088, 093, 098
Philips: 066, 067, 068,
Diamond: 093
070, 072, 073, 074,
Eagle: 091
075, 091, 092
GE: 061, 062
Pioneer: 076, 077
Gemini: 069, 070, 094
Proscan: 061, 062
General Instruments:
Radio Shack: 092, 097,
062, 089, 096
099
Hamlin: 093
RCA: 064, 081
16
CODE DEVICE
Realistic: 065
Recoton: 102
Samsung: 077, 090
Scientific Atlanta: 063,
078, 079, 080, 088,
098, 101, 105
Sears: 095
Signature: 062
Signature 2000: 096
Sprucer: 081, 085
Starcom: 069, 082, 087,
096, 103, 104
Stargate: 069, 090
Sylvania: 095, 100
TeleView: 090
Texscan: 100
Tocom: 071, 084, 085
POWER
TV / VIDEO RECALL
INFO
1 2 3
4 5 6
8 9
7
CHRTN
+10
0
100
ENT
FAV
MENU
DVDMENU
FAV
TV
CBL/SAT CH VOL
VCR
DVD
POP DIRECT CH MUTE SLEEP
TV/VCR PAUSE STOP PLAY
FREEZE SOURCE SPLIT
Note:
REW FF SKIP / SEARCH
• Every time you change the batteries, you CH SCAN SWAP POP CH
REC
LIGHT
will need to reprogram the remote control.
• Some newer VCRs respond to either of two
codes. These VCRs have a switch labeled
"VCR1/VCR2. " If your VCR has this kind of
switch and does not respond to the codes
for your VCR brand, set the switch to the
other position ("VCR1" or "VCR2") and
reprogram the remote control.
CODE
U. S. Electronics: 087, General Instruments:
096, 098
United Cable: 082
Universal: 065, 092, 097, Hitachi: 033
099, 102, 103 Hughes: 033
Wards: 096 Hughes Network
Intersat: 048
Satellite receiver
Janeil: 027
Alphastar: 038, 059
JVC: 017, 057
Chaparral: 034
Kenwood: 029
DISH Network: 057
Magnavox: 060
Drake: 020, 040, 044,
Optimus: 058
046, 050, 053
Pansat: 036, 052
Echostar: 018, 041, 051
Primestar: 015, 042
Express Vu: 057
Proscan: 008, 009, 013
Fujitsu: 027
Radio Shack: 022, 023,
GE: 008, 009, 013
RECALL
POWER
Channel
Number
Device Switch
010, 011, 012, 022,
023, 031, 049
Systems: 019
030