Advertisement
39 VIDEO_PWM_NORMAL
40 VIDEO_PWM_MEDIUM
41 VIDEO_PWM_MAXIMUN
42 VGA_PWM_MIN
43 VGA_PWM_MAX
//YPbPr H/V Position
44 YPBPR_POS_H
45 YPBPR_POS_V
46 YPBPR_PHASE
//Audio
47 AUD_GAIN_TV
48 AUD_GAIN_DTV
49 AUD_GAIN_HDMI
50 AUD_GAIN_SCART
51 AUD_GAIN_DVD
52 AUD_HEADPHONE_VOL
53 AUD_BALANCE
//Tuner & Panel Id
54 TUNER ID
55 PANEL_ID
Select Smart picture to display a list of predefined picture settings, each corresponding with specific factory settings.
Personal refers to the personal preference settings of picture in the picture menu.
Note: This Magnavox TV has been set at the factory to look best in bright store environments, which typically use
fluorescent lighting. As your home will likely not be as well lit as a store, we recommend that you cycle through the various
smart picture modes to find the one that best suits your own viewing conditions. Most consumers will find that
the correct choice.
You can press the Smart picture button on the remote control repeatedly to select either Personal, Rich, Natural, Soft, or
Powersaver picture settings.
Note:
- When you watch programs by Composite Video signal, it' s recommended to select
picture.
- The moment you are in a predefined Smart picture setting and you modify the Picture menu, all values of the menu will
overwrite those previously madein personal setting.
Smart picture control items: (values different by smart picture)
User Menu OSD:(Back-End)
Contrast
Brightness
Color
Sharpness
color temperature
Tint
Noise Reduction
Dynamic Contrast
Factory menu OSD
SP_MODE_PWM
SP_MODE_3DNR (range 0 to 5)
5. Service Modes, Error Codes and Fault Finding
to limit PC brightness range
(value different by each timing)
interlace no effect, only progressive can be adjusted
Manual adjust HDMI phase
volume different between
audio
each source volume to be the same
amplifier left and right volume
4 is PHILIPS_FQA1236,
5 is Forward,
6 is PHILIPS_FQA1236_E,
7 is ALPS_TDQU4
value the same to CLI command
can be changed when factory mode
can be changed when factory mode
(when Dynamic contrast Off)
0~255
0~255
0~255
0~255 Dark
0~255 Bright
source, for
64~-64
64~-64
64~-64
64~-64
12~-64
-50~50 Press Left and Right to change value
4,5,6,7
Soft or Power saving
TPM1.0U LA
Natural
is
Mode via Smart
13
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Advertisement
