Advertisement
Step 7:Remove BKT-LB,BKT-TOP,BKT-RB,BKT-Buttom.
Unscrew Twenty five screws as Fig.10
Step 8:Remove BKT-RA and BKT-LA
Unscrew four screws as Fig.11
Step 9: Pick up Front bezel assy as Fig 12
4. Mechanical Instructions
Fig 10
4.2 Set Re-assembly
To re-assemble the whole set, execute all processes in reverse
order.
Notes:
a. While re-assembling, make sure that all cables are placed
and connected in their original position.
b. Pay special attention not to damage the EMC foams at the
SSB shielding. Check that EMC foams are put correctly on
their places.
In warranty, it is not allowed to disassembly the LCD panel, even the
backlight unit defect.
Fig 11
Out of warranty, the replacment of backlight unit is a correct way
when the defect is cused by backlight (CCFL,Lamp).
Fig 12
TPM 2.0U LA
Service position
11
Advertisement
