Using The Surround Sound Feature; Resetting Your Audio Adjustments; Checking The Digital Signal Strength - Toshiba 26DF56 Owner's Manual

Using the surround sound feature

The surround sound feature expands the audio listening field wider and
deeper to create exceptional sound quality from the TV's speakers.
The feature uses stereo signals from a TV broadcast or video input.
To turn on the surround sound feature:
1. Select the STEREO mode, if available (see "Selecting stereo/SAP
broadcasts" on page 33.)
2. Press MENU, then press
display the AUDIO menu.
3. Press ▲ or ▼ to highlight
SURROUND.
4. Press or to highlight ON.
To turn off the surround sound feature:
Highlight OFF in step 4 above.
In general, you can leave your TV in surround mode because it will
automatically output the type of sound being broadcast (surround
stereo or monaural).

Resetting your audio adjustments

The RESET function returns your audio adjustments to the following
factory settings:
MTS ................. STR
Bass ................. center (25)
Treble ............... center (25)
Balance ............ center (0)
To reset your audio adjustments:
1. Press MENU, then press
display the AUDIO menu.
2. Press ▲ or ▼ to highlight RESET,
and then press .

Checking the digital signal strength

You can check the strength of the digital signal by viewing the digital
signal meter.
To view the digital signal meter:
1. Press MENU, then press
to display the SETUP menu.
2. Press ▲ or ▼ to highlight SIGNAL
METER.
3. Press or to check the digital
signal strength.
4. Press EXIT to return to the normal screen.
3Y90121A(E)_P32-Back 35
or to
A U D I O
S T A B L E S O U N D
O F F
S U R R O U N D O N / O F F
R E S E T
: S E L E C T : A D J U S T
Digital output ..................... PCM
Stable sound ..................... OFF
Surround ........................... OFF
or to
A U D I O
S TA B L E S O U N D O F F
S U R R O U N D O F F
R E S E T
: S E L E C T : A D J U S T
or
S I G N A L M E T E R
C H A N N E L ( D I G I TA L ) 1 - 0 0 1
8 0
35
Note:
• The SIGNAL METER feature is not
available for analog channels.
• After approximately 4 minutes, the SIGNAL
METER screen will return to normal TV-
operation automatically.
• When you select a vacant channel, the
signal meter may react.
4/6/06, 3:14 PM
Menu/Enter
Exit