Locking Channels; Locking Video Input - Toshiba 26AF45C Owner's Manual

4. Use the Channel Number buttons (0–9) to enter your PIN code.
If you are accessing the LOCK menus for the first time, select a
four-digit number to be your PIN code. Press ENTER.
The BLOCKING menu appears.
CH
PICTURE AUDIO SETUP
LOCK
CH LOCK START
VIDEO LOCK OFF
OFF
GAME TIMER
NEW PIN CODE START
SELECT
5. You may now enable blocking. See "Locking channels" (below),
"To change your PIN code" (below), or "Locking video input"
(page 21), or "Setting the GameTimer™" (page 21).
To change your PIN code:
1. Press MENU, then press
2. Press L or M to highlight LOCK.
3. Press or
4. Use the Channel Number buttons (0–9) to enter your PIN code.
Press ENTER. The BLOCKING menu appears.
5. Press L or M to highlight NEW PIN CODE and press
display the NEW PIN CODE menu.
6. Use the Channel Number buttons (0–9) to enter a new code.
Press ENTER.
7. Press EXIT to return to normal viewing.

Locking channels

With the CH LOCK feature, you can lock specific channels. You will not
be able to tune locked channels unless you clear the setting. You can
choose to lock up to nine TV channels and nine cable channels.
To lock channels:
1. Use the Channel Number buttons (0–9, 100) to display the
television channel you wish to lock.
2. Press MENU, then press
3. Press L or M to highlight LOCK.
4. Press or
5. Use the Channel Number buttons (0–9) to enter your PIN code,
then press ENTER. The LOCK menu appears.
6. Press L or M to highlight CH LOCK and press
the CH LOCK menu.
7. Press or
• SET– to set the channel as one to be
locked. Then press ENTER.
• CLEAR– to clear all channels from
the list of locked channels.
Then press ENTER.
8. Repeat steps 1 through 7 to lock other
channels. When you are finished
locking channels, press EXIT to return
to normal viewing.
If you try to tune a locked channel, the
TV will not display it, but will display the
nearest unlocked channel.
J3V50121A(E)_P18-30.p65
OPTION
ADJUST
or to display the OPTION menu.
to display the BLOCKING menu.
or to display the OPTION menu.
to display the LOCK menu.
to select the following:
PICTURE AUDIO
LOCK
CH LOCK
VIDEO LOCK
GAME TIMER
NEW PIN CODE
SELECT
PICTURE AUDIO SETUP
CH LOCK : CH 12
SET/CLEAR
LOCKED CH
TV CABLE
SELECT
END
20
Note:
If you forget your PIN code, press DISPLAY
four times within five seconds from the
BLOCKING menu. This resets your PIN code
and allows you to proceed to the BLOCKING
menu.
or to
or to display
CH
SETUP OPTION
START
OFF
OFF
START
ADJUST
CH
OPTION
SET CLEAR Note:
0 0 0
0 0 0
After programming CH LOCK, change
0 0 0
channels before turning off the television.
SET ENTER
EXIT
20
30/06/2005, 5:08 PM
Display
Channel
Numbers
Menu/
Enter
Exit
Channel
Numbers
Menu/
Enter
Exit