Using The Remote Control; Preparing The Remote Control For Use; Installing The Remote Control Batteries; Using The Remote Control To Operate Your Other Devices - Toshiba 26AF45C Owner's Manual

Using the remote control

Preparing the remote control for use

With the remote control, you can operate your TV, most cable TV
converters/satellite receivers, VCRs, and DVD players together, even if
they are different brands. If you will be using your TV with a Toshiba
satellite receiver, VCR, or DVD player, your remote control is already
programmed and ready to use. If you own different brands of cable TV
converters/satellite receivers, VCRs, and/or DVD players, you must
first program your remote control. (See "Programming the remote
control to operate your other devices" on page 12.)

Installing the remote control batteries

To install the batteries:
1. Open the battery cover on the back of the remote control.
2. Install two "AAA" size batteries. Match the + and – signs on the
batteries to the signs on the battery compartment.
3. Close the battery cover on the remote control until the lock snaps.

Using the remote control to operate your other devices

To control a cable TV
converter/satellite
receiver:
Program the remote
control to recognize the
brand of your cable TV
converter/satellite
receiver (see
"Programming the
remote control to
operate your other
devices" on page 12.)
The buttons shown at
right will control the
cable TV converter/
satellite receiver.
Press "CBL/SAT" first.
J3V50121A(E)_P07-17.p65
Power
Input (TV)
Mute (TV)
Channel
Numbers
CH RTN
(Channel Return)
CAP/TEXT
CBL/SAT
FAV 3/4
Pic Size
Channel +/–
Volume +/–
TV/VCR
11
Note:
The TV remote control may not operate your
VCR, DVD player, or cable TV converter.
Refer to the owner's manual supplied with
your other devices to see which features
may be available. Additionally, the remote
control for this TV may not support certain
features available on the original remote
controls for your other devices, in which case
it is suggested that you use the original
remote control for the applicable device.
Caution:
• Never throw batteries into a fire.
Notes:
• Be sure to use AAA size batteries.
• Dispose of batteries in a designated
disposal area.
• Batteries should always be disposed of with
the environment in mind. Always dispose of
batteries in accordance with applicable
laws and regulations.
• If the remote control does not operate
correctly, or if the operating range becomes
reduced, replace batteries with new ones.
• When necessary to replace batteries in the
remote control, always replace both
batteries with new ones. Never mix battery
types or use new and used batteries in
combination.
• Always remove batteries from remote
control if they are dead or if the remote
control is not to be used for an extended
period of time. This will prevent battery acid
from leaking into the battery compartment.
To control a VCR:
Program the remote
control to recognize
the brand of your VCR
(see "Programming
the remote control to
(Channel Return)
operate your other
devices" on page 12.)
The buttons shown at
right will then control
the VCR.
Press "VCR" first.
VCR controls
VCR CH 3/4
11
30/06/2005, 5:06 PM
Input (TV)
Power
Channel
Numbers
CH RTN
VCR
Pic Size
Channel +/–
Volume +/–