Blocking Programs By Ratings - Toshiba 20AF44 Owner's Manual

3. Press or to display the V-CHIP menu.
CH
PICTURE AUDIO SETUP OPTION
V-CHIP
BLOCKING RESET
PIN CODE
SELECT [0-9] SET ENTER
END EXIT
4. Use the Channel Number buttons (0–9) to enter your PIN code.
If you are accessing the V-Chip menus for the first time, select a
four-digit number to be your PIN code. Press ENTER. The
BLOCKING menu appears.
CH
PICTURE AUDIO SETUP OPTION
V-CHIP
ENABLE BLOCKING ON OFF
SET RATING START
BLOCKING OPTION START
NEW PIN CODE START
SELECT ADJUST
5. You may now enable blocking. See "Blocking programs by ratings"
(below), "Locking channels" (page 22), "To change your PIN code"
(below), or "Blocking unrated movies or programs" (page 22).
To change your PIN code:
1. Press MENU, then press
2. Press or to highlight V-CHIP.
3. Press or to display the V-CHIP menu.
4. Use the Channel Number buttons (0–9) to enter your PIN code.
Press ENTER. The BLOCKING menu appears.
5. Press or to highlight NEW PIN CODE and press
display the NEW PIN CODE menu.
6. Use the Channel Number buttons (0–9) to enter a new code.
Press ENTER.
7. Press EXIT to return to normal viewing.

Blocking programs by ratings

The Motion Picture Association of America (MPAA) uses a rating
system to qualify motion picture content. Television broadcasters
employ a rating system to qualify the content of television programs, as
well. The MPAA, Youth TV, and TV ratings work with the V-Chip feature
and allow you to block programs according to the rating limits you set.
or to display the OPTION menu.
or
19
Note:
If you forget your PIN code, press RECALL
four times within five seconds from the V-CHIP
menu. This allows you to proceed to the
BLOCKING menu and resets your PIN code.
to
POWER
TV VCR
1 2 3
4 5 6
7 8 9
CH +
VOL
MENU/
–
ENTER
CH –
EXIT RECALL TV/VIDEO
VOL CH RTN
RESET CAP/TEXT 1/2
DISPLAY DVD CLEAR TOP MENU
CODE MTS SLEEP
CABLE
DVD
+10
100
Channel
Numbers
0
VOL
+
Menu/
Enter
Recall
FAV
FAV Exit
16:9
DVD MENU
MUTE