Using The Remote Control; Preparing The Remote Control For Use; Installing The Remote Control Batteries; Using The Remote Control With A Vcr, Dvd Player Or Cable Tv Converter - Toshiba 14AF43 Owner's Manual

Using the remote control

Preparing the remote control for use

With the remote control, you can operate your TV, most VCR and DVD
player models, and cable TV converters together, even if they are
different brands. If you will be using your TV with a Toshiba VCR or
DVD player, your remote control is already programmed and ready to
use. If you own different brands of VCRs, DVD players and/or
converters, you first have to program your remote control. (See
"Programming the remote control for use with a VCR, DVD player, or
cable TV converter" on page 12.)

Installing the remote control batteries

To install the batteries:
1. Open the battery cover on the back of the remote control.
2. Install two "AAA" size batteries. Match the + and – signs on the
batteries to the signs on the battery compartment.
3. Close the battery cover on the remote control until the lock snaps.
Using the remote control with a VCR, DVD player, or cable TV converter
To control a VCR:
Program the remote
Power
control to recognize
the brand of your VCR
(see "Programming the
Channel
remote control for use
Numbers
with a VCR, DVD
player, or cable TV
converter" on page
12). The buttons
Channel +/–
shown at right will then
control the VCR. Press
the VCR button first.
Fast Forward
Rewind
TV/VCR
Record
VCR CH
Pause/Still
VCR
Enter
Play
Stop
/
Note:
The TV remote control may or may not
operate your VCR, DVD player, or cable TV
converter. Refer to the owner's manuals
supplied with the equipment to see which
features are available. In addition, the original
controllers may have features not available on
this remote control. If you would like to
continue to use these features, you may want
to use the original remote control.
Cautions:
• Dispose of batteries in a designated
disposal area. Do not throw batteries into a
fire.
• Do not mix battery types or combine used
batteries with new ones.
• Remove dead batteries immediately to
prevent battery acid from leaking into the
battery compartment.
• If you do not intend to use the remote control
for a long time, remove the batteries.
To control a DVD
player:
Program the remote
control to recognize the
brand of your DVD
player (see
"Programming the
DVD MENU
remote control for use
with a VCR, DVD
player, or cable TV
converter" on page 12).
The buttons shown at
right will then control
DVD Menu /
the DVD player. Press
the DVD button first.
DVD Skip
11
Power
DVD
Number
buttons
/
ENTER
TOP Menu
OSD
DVD Clear
Fast Forward
Play
Rewind
DVD Menu
Stop
/
Pause/Still