Troubleshooting; Customer Service - Bolt CYCLONE DR Series User Manual

Troubleshooting

Problem
The Cyclone DR is charged and connected to a flash with a
cable, but no indicator lights illuminate when you turn it on.
The Status indicator light is flashing.
The Cyclone DR is charged and connected to a flash with a
cable, but the flash does not fire.

Customer Service

For customer service, please go to www.boltflashes.com.
Solution
The cable is damaged or you are using the wrong cable.
The pack is overheated. Turn it off and wait for at least 10
minutes before using it again.
Make sure you have AA or other internal batteries installed in
the flash. These may be required for its computer functions
to work.
|
Troubleshooting 15