Advertisement
Attach the toilet seat according to the
installation instructions included.
Open the supply shut-off valve and
check all connections for leakage. If
the connections have been properly
assembled, a slight retightening of the
nuts should stop any leakage.
FILL FLOAT WITH
BALLAST
Test flush the toilet.
Periodically Check all connections for
leaks for several days following
installation.
Set the tank cover in place on the tank.
MINOR ADJUSTMENT OF
WATER LEVEL
Move the snap along "OPEN" direction.
To lower water level: Move water cup
down to a proper height and rotate
screw anticlockwise to achieve the
desired water level. (Refer to float
adjustment instructions.)
1176009-T01-A
Check
This Area
Fig.#8
8
Fig.#9
9
Fig.#10a
10a
-5-
Snap
OPEN
Screw
Fig.#10b
10b
Advertisement
