Advertisement
ingilizce-2.FH11 6/7/05 12:14 PM Page 3
If any of the Timers is activated, the
Green coloured light on the front side
will flash.
Please note: If you turn your television
off from the main power supply switch
then the sleep timer modes selected will be reset
and cancelled.
In Timer Mode: Use the right/left ( /
buttons to select the program you want the TV
to open when switching on.
Feature
In the MENU select Feature and press "OK" or
(
) button . The Feature menu will be on screen.
Teletext
Select the teletext bar using the "OK" or down
button in the setup menu. To right (
you choose Automatic; Fastext or Toptext (option)
features can be determined for the channels with
txt broadcasting. When list is selected, if the
current channel does not broadcast Fastext or
Toptext, you can store the teletext page numbers
you want with the colour buttons or (
(
) buttons in the section there are 4 different
colour buttons when you select teletext.
While in the other pages of teletext, you can
directly access this page you selected by pressing
the colour button linked to them.
Teletext
Panel lock
Back light
Back
–
) button; If
+
) and
FEATURE
List
Off
Watch TV
ENGLISH -19-
Panel Lock
If you switch this feature On, the button
on the TV will not work when the TV is
in Stand-by mode and screen will show
a Panel Lock warning. In addition if the
Panel Lock is On, the TV will not switch
on with the (
) and (
mode.
)
+
Back Lighting: Using this feature you can
increase or decrease the panel light.
PIP Usage (Picture in Picture) Feature
1. Press the PIP button on your remote
control.
2. A picture will open in main picture
and will position itself in the lower
screen.
3. If you press the PIP button again,
you will enter the PAP mode in which
the main picture and the PIP picture will
be shown in equal size.
4. If you press the PIP button the third
time, the window will close and you
will have exited this mode.
Note: If you want to exit the PIP mode
at any time press the EXIT button.
PIP Menu
In the Features menu select PIP and press
the OK button or the right/left (
buttons. The screen will show the PIP
menu.
Note: This menu is only available in
the features menu if the PIP is active.
Picture Format
PIP Size
PIP Position
Picture Format
To change the PIP Picture Format select this feature
and press the right/left (
can be watched in the 4:3 or 16:9 format.
) buttons from stand-by
/
–
PIP
Back
Watch TV
) buttons. PIP window
/
–
+
)
+
Advertisement
