Troubleshooting - Xiaomi Mi Robot Builder Rover User Manual

We declare that Toys is in compliance with the essential requirement and relevant
provisions of Directive 2009/48/EU.
Environmentally friendly disposal
Old electrical appliances must not be disposed of together with the residual waste, but
have to be disposed of separately. The disposal at the communal collecting point via
private persons is for free. The owner of old appliances is responsible to bring the
appliances to these collecting points or to similar collection points. With this li le
personal effort, you contribute to recycle valuable raw materials and the treatment of
toxic substances.

Troubleshooting

Issues
Power bu on doesn't respond
Can't connect via Bluetooth
Indicator ligh urns red a er
a firmware upgrade and an error
sound prompt is played
The program doesn't run
The indicator light doesn't turn
red when charging
The robot walks shakily
Can't use the app to control the robot
Can't charge
Press the Reset bu on if you can't solve the issues using the solutions above.
This version is for private use only and should not be distributed.
Possible reasons
The controller's ba ery is low
The controller is off
Your phone's Bluetooth is off
Bluetooth disconnected
The controller's ba ery is low
Bluetooth disconnected
You haven't tapped the Play bu on
You turned off the Programming mode
The power adapter isn't
connected properly
The robot isn't assembled properly
Bluetooth disconnected
You're using an incompatible
power adapter
06
Solutions
Charge the controller
Turn the controller on
Turn on Bluetooth on your phone
Connect via Bluetooth again
Charge the controller
Connect via Bluetooth again
Tap the Play bu on
Turn on Programming mode
Connect the power adapter properly
Read building instruction to make sure
you've assembled the robot properly
Connect via Bluetooth again
Use a compatible power adapter