Advertisement
Figure 5
Figure 6
Figure 7
E
Turn the chair right side up and install the backrest assem-
bly. Slide the two backposts into the back of the seat frame and
tighten the two socket head cap screws using the yellow T-han-
dle Allen wrench (Refer to Figures 5 & 6). Also tighten the four
button head capscrews that attach the back cushion to the
back posts using the 5/32" Allen wrench (Refer to Figure 7).
SAFETY PRECAUTION!
Both backrest posts must be completely engaged with the seat
frame and securely tightened. If they are not fitted correctly, there
is a risk of the posts dislodging from the seat frame. This could
cause serious injury or even death!
- PAGE 2 -
Advertisement
