Page 1
!ATTENTION: READ BEFORE ASSEMBLING/OPERATING! ASSEMBLY & PACKING INSTRUCTIONS FOR THE MULTICHAIR 5100tx multichair 5100tx !ATTENTION: READ BEFORE ASSEMBLING/OPERATING! November 2016...
Page 2
!ATTENTION: PLEASE READ! Please see Page 6: LIMITED WARRANTY of these instructions. If the warranty is not acceptable, contact Nuprodx, Inc. for infor- mation about returning the chair for a refund (Restocking fees and shipping charges will be applied). This chair is designed and intended for indoor shower and bathroom use.
Page 3
Turn the chair right side up and install the backrest assem- bly. Slide the two backposts into the back of the seat frame and tighten the two socket head cap screws using the yellow T-han- dle Allen wrench (Refer to Figures 5 & 6). Also tighten the four button head capscrews that attach the back cushion to the back posts using the 5/32”...
A Ensure all fasteners (bolts/washers) are securely tightened and all chair parts have been assembled correctly (Refer back to Assembly Instructions if needed. Contact Nuprodx, Inc. if unsure of anything). B Commode Chair: Position the multiCHAIR over the toilet, so that the center of the commode opening is directly above the cen- ter of the toilet bowl.
This exclusive warranty remedy will not have failed as long as Nuprodx, Inc. is willing and able to repair or replace as described, but if this remedy should be held to have failed, the only remaining warranty obligation of Nuprodx, Inc.
Figure F - Tighten the cloth belt around the complete frame. 889 Hayes St., Sonoma, CA 95476 (707) 934-8266, (707) 934-8269 fax, (855) 220-5171 toll free, info@nuprodx.com - PAGE 5 -...