Advertisement

SAFETY PRECAUTION
CAUTION:
The lightening flash with
arrowhead symbol, within an
equilateral triangle, is intended
to alert the user to "dangerous
voltage" and to prevent from a
risk of electric shock.
WARNING: The apparatus shall not be exposed to dripping or splashing and that no objects filled
with liquids, such as vases, shall not be placed on the apparatus.
WARNING: Do not place naked flame sources, such as lighted candles on the apparatus;
otherwise, there is the danger of fire.
WARNING: The unit should be connected to a power supply only of the type descry bed in the
operating instructions or as marked on the unit. If you are not sure of the type of power supply (for
example: 120 or 230V) to your home, consult your local dealer or local power company.
WARNING: Do not open the cabinet or touch any parts in the inner mechanism. Consult your local
dealer for technical service if the opening is required.
WARNING: The mains plug is used as the disconnect device, the disconnect device shall remain
readily operable.
WARNING: Take attention to the environmental aspects of battery disposal. The battery of remote
control should not be exposed excessive heat such as sunshine, fire or the like.
WARNING: Maintenance man must use the appointed screw in the rear plate.
WARNING: Ensure a minimum distance of 5 cm around the apparatus for sufficient ventilation.
WARNING: Ensure that the ventilation is not impeded by covering the ventilation openings with
items such as newspapers, table-cloths, curtains, etc.
WARNING: Use the apparatus only in moderate climates (not in tropical climates).
Note: Do not open the cabinet to avoid the unit direct exposure to radiation.
Warning:
To reduce the risk of electric
shock, don't open the cabinet.
Refer servicing to qualified
personnel only.
The exclamation point within an
equilateral triangle is intended to
alert the user to important
operating and maintenance
(servicing).

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SR-2220H and is the answer not in the manual?

Questions and answers

John
May 23, 2025

Does make auto biss key

Summary of Contents for star sat SR-2220H

  • Page 1 SAFETY PRECAUTION CAUTION: The lightening flash with Warning: The exclamation point within an arrowhead symbol, within an To reduce the risk of electric equilateral triangle is intended to equilateral triangle, is intended shock, don't open the cabinet. alert the user to important to alert the user to "dangerous Refer servicing to qualified operating and maintenance...
  • Page 2 Unit Cleaning: After the unit power is turned off, you can clean the cabinet, panel and remote control with a soft cloth lightly moistened with a mild detergent solution. Attachments: Never add any attachments and/or equipment without the manufacturer consent; as such additions may result in the risk of fire, electric shock or other personal injury.
  • Page 3: Table Of Contents

    Contents Contents 1 Remote Control & Panel Description ..................3 1.1 Front Panel Description ......................3 1.2 Rear Panel Description......................4 1.3 Remote Control Description .....................5 2. Basic Operations.......................... 7 2.1 Switch on STB ..........................7 2.2 Standby Mode...........................7 2.3 Mute ............................7 2.4 Zoom ............................8 2.5 SUB ............................8 2.6 TIME SHIFT ..........................8 2.7 USB ............................8...
  • Page 4 Contents 3.4.4 Local Time Setting......................23 3.4.5 Time Setting .........................24 3.4.6 Parental Lock........................25 3.4.7 OSD Setting........................26 3.4.8 Favorite .........................26 3.4.9 Other ..........................27 3.5 Tools............................28 3.5.1 Information........................28 3.5.2 Factory Default ......................29 3.5.3 S/W Upgrade by OTA ....................29 3.6 Rec ............................30 3.6.1 PVR Storage Information .....................30 3.6.2 PVR Setting ........................31 3.6.3 Backup To USB ......................31 3.6.4 Media Player.........................32...
  • Page 5: Remote Control & Panel Description

    Remote Control & Panel Description 1 Remote Control & Panel Description 1.1 Front Panel Description POWER: Is used to switch between the working mode and the standby mode. Display (4-Digit/7-Segment): Displays the received channel number while operating and time while in standby mode. Remote Sensor: Detects the infrared signals from the remote control unit.
  • Page 6: Rear Panel Description

    Remote Control & Panel Description 1.2 Rear Panel Description RS-232: Serial Port allowing software upgrades. IF IN: Satellite input. IF OUT: Satellite output for cascading to other devices Note: The operation of another receiver at the same time is only possible with limited channel selection.
  • Page 7: Remote Control Description

    Remote Control & Panel Description 1.3 Remote Control Description...
  • Page 8 Remote Control & Panel Description Power: The power key turns the receiver on and off. Mute: This key switches the sound on and off. Zoom: Allows you to magnify a certain area on the images and to enter the Multi-Picture mode. SUB: Used to display the subtitle data.
  • Page 9: Basic Operations

    Basic Operations 2. Basic Operations 2.1 Switch on STB Switch the [Device’s Main Power] switch on. When the STB is first used it will display “Quick Setup” window. you will set Language, First Audio, Second Audio, LNB Power, Antenna Setup and Multi Search. Frequently Asked Question The power of my STB is on and it is running in TV mode but the TV screen shows nothing:...
  • Page 10: Zoom

    Basic Operations 2.4 Zoom In TV mode, press [Zoom] to enter the “MULTI” menu. The [Zoom] key allows you to magnify a certain area on the images and the current screen will show. Press [Zoom & OK] key again, the image will enlarge rotate as x1, x2, x4, x6, x8, x12, x16. In “x2 ~ x16”...
  • Page 11: Tv/Radio

    Basic Operations 2.8 TV/Radio In TV mode, press [TV/Radio] to switch to Radio mode. In Radio mode press [TV/Radio] again to switch back to TV mode. 2.9 TTX/CC Press [TTX/CC] button in TV mode to open the teletext page. This service is depending on the support of the channel provider.
  • Page 12 Basic Operations 2.12 ► When you play a current or recorded program, press [►II] will stop the program. 2.13 II When you play a current or recorded program, press [►II] again will play the program continually. 2.14 ■ ■ When you play a recorded program, press [ ] button will stop the recorded channel playing and ■...
  • Page 13: Menu

    Basic Operations 2.16 MENU Press [Menu] button to enter or exit the current menu. 2.17 EXIT Press [Exit] button to exit the current menu. 2.18 CH▲/▼ In TV/Radio mode press [CH▲/▼] to change channel. 2.19 V◄/► In TV/Radio mode, press [Vol◄/►] to adjust volume. 2.20 OK In TV mode press [OK] button to open the Channel List window.
  • Page 14 Basic Operations Ø Press [Green] button to open the Find window. You can use this feature to find channel by their names. Ø Press [Blue] button to open the “Rename” window like showed beside.
  • Page 15: Epg

    Basic Operations 2.21 EPG The STB supports Electronic Program Guides (EPG) to give you information about the actual programs of certain channels like event name, subtitle, description, start and finish time. This feature is depending on the service of the channel provider. Press [EPG] to open the EPG window.
  • Page 16: I◄◄/►►I

    Basic Operations 2.23 I◄◄/►►I Press [I◄◄/►►I] button when you play a marked program, the screen will jump to the marked point. Jump Step Value: “1 Mins / 3 Mins / 5 Mins / 10 Mins / 15 Mins” jump. Jump Step Value: Record the an mark point. 2.24 Audio In TV mode, press the [Audio] button to open the Audio Mode window.
  • Page 17: Recall

    Basic Operations In the Favorite Group window you can select the desired favorite channel with [CH▲/▼] and confirm it with [OK] to switch to it. In bigger groups you can navigate with [Pgup/ Pgdn]. Press [VOL◄/►] to switch Favor Group 1 ~ Favor Group 5. Press [Exit] to close the Favorite Group window.
  • Page 18: Menu Operations

    Menu Operations 3 Menu Operations Press the [MENU] button to display the main menu. And menu is a field of text shown on the TV screen, the selected item is generally become red background. Use the [CH▲/▼ / Vol◄/►] button you can move, upwards / downwards and leftwards / rightwards s in the menu.
  • Page 19: Satellite Install

    Menu Operations Ø In the “DiSEqC1.0” item press [Vol◄/►] to select the “DiSEqC1.0 list” to select directly with [CH▲/▼], press [OK] to confirm it. Ø Search: Use [Vol◄/►] to select “All” and “Free”. Press [OK] to start scanning. In the lower part of the window the progress of scanning and the found channels are displayed.
  • Page 20: Motorised System

    Menu Operations In the “LNB Type” item press [OK] to select the “LNB Type list” to select directly with [Vol◄/►], press [OK] to confirm it. In the “Transponder” item press [OK] to select the “Transponder list” to select directly with [CH▲/▼], press [OK] to confirm it.
  • Page 21: Edit Channel

    Menu Operations 3.3 Edit Channel After Edit Channel the Settings menu you can see the window like. In “Edit Channel” menu; Press [CH▲/▼] to select menu items among TV Channel List, Radio Channel List and Delete All. 3.3.1 TV Channel List In “TV Channel List”...
  • Page 22: Radio Channel List

    Menu Operations 3.3.2 Radio Channel List Basically the operation of “Radio Channel List” is same as “TV Channel List”, except that in the small channel window the radio Logo will be displayed. 3.3.3 Delete All To delete all channels: Enter the password. The default password is “0000”. After entering the password correct a safety question will show up where you have to confirm first Select “OK”...
  • Page 23: System Setup

    Menu Operations 3.4 System Setup After System Setup the Settings menu you can see the window like. In “System Setup” menu; Press [CH▲/▼] to select menu items among Language, TV System, Display Setting, Local Time Setting, Parental Lock, OSD Setting, Favorite, Other. 3.4.1 System Setting In “System Setting”...
  • Page 24: Tv System

    Menu Operations Subtitle Language: In “OSD Setting” menu, use [OK] to select directly with [CH▲/▼] to select “On” or “Off”. If the current channel has subtitle information, it will be displayed if this function is “On”. If this function is “Off” subtitles won’t be displayed. The selections of subtitle language include: English, German, French, Spanish, Italian, Portuguese, Turkish, Polish, Russian, Danish, Greek, Hungarian, Dutch, Arabic, Farsi.
  • Page 25: Display Setting

    Menu Operations 3.4.3 Display Setting In “Display Setting” menu; Video Resolution: Press [OK] to select directly with [CH▲/▼] to switch between 0~100. Contrast: Press [OK] to select directly with [CH▲/▼] to switch between 0~100. Saturation: Press [OK] to select directly with [CH▲/▼] to switch between 0~100. Hue: Press [OK] to select directly with [CH▲/▼] to switch between 0~100.
  • Page 26: Time Setting

    Menu Operations The “GMT Offset” item is only available when “GMT Usage” is set to “On”. Press [Vol◄/►] to set the “GMT Offset” value. With every time you press the button the time offset will be increased /decreased by half an hour. Summer Time: Press [Vol◄/►] to switch this function “On”...
  • Page 27: Parental Lock

    Menu Operations PS Record: Press [Vol◄/►] to switch this function “No” or “Yes”. Press [Save] to confirm it. Press [Cancel] to leave the “Time Setting” menu. 3.4.6 Parental Lock In “Parental Lock” menu; You can set a password for anyone who wishes to operate the “Installation” menu. You can also set the password to lock channels.
  • Page 28: Osd Setting

    Menu Operations 3.4.7 OSD Setting In “OSD Setting” menu; OSD Timeout: This setting determines the duration the info window is displayed on the screen when you change channels. Press [Vol◄/►] to set the time between 1 to 10 seconds. OSD Transparency: With this parameter you can set the transparency of the menus. Press [Vol◄/►] select the value between 10%, 20%, 30%, 40% and “Off”(means no transparency function).
  • Page 29: Other

    Menu Operations After modification select “OK” of button bar and press [OK] on the RCU to rename the favorite group name and leave the edit mode. Press [Exit] on the RCU to exit the edit mode without saving the favorite group name. 3.4.9 Other In “Other”...
  • Page 30: Tools

    Menu Operations 3.5 Tools After Tools the Settings menu you can see the window like. In “Tools” menu; Press [CH▲/▼] to select menu items among Information, Factory Setting, S/W Upgrade by OTA. 3.5.1 Information When you select the “Information” menu you will see a screen like beside. On the right of the screen displays data about the current system.
  • Page 31: Factory Default

    Menu Operations 3.5.2 Factory Default When you press [OK] on the “Factory Default” item: A dialogue box will occur where you need to enter the password. After you input the correct password a warning message will be displayed like the one beside. If you select “Yes”...
  • Page 32: Rec

    Menu Operations 3.6 Rec In “Rec” menu; Press [CH▲/▼] to select menu items among PVR Storage Information, PVR Setting, Upgrade By USB, Media Player, Remove USB device safely. 3.6.1 PVR Storage Information Press [Vol◄/►] to select the wanted item partition. When you select the “PVR Storage Information”...
  • Page 33: Pvr Setting

    Menu Operations 3.6.2 PVR Setting In “PVR Setting” menu; Time shift: Press [Vol◄/►] to switch between ON or OFF. Jump Step Value: Press [Vol◄/►] to switch between “1 mins / 5 Mins / 10 Mins / 30 Mins / 30 sec”. The value control the step of I◄◄/►►I operation.
  • Page 34: Media Player

    Menu Operations 3.6.4 Media Player In “Media Player” menu; Press [CH▲/▼] to select the wanted item partition. Press [Switch / Yellow] keys select the Music, Image, Video, Record Manager. The color buttons offer further functions to manage the. 3.6.5 Remove USB device safely In case you want to remove the USB device please always do this as follows: Press [OK] to select directly with [CH▲/▼] remove to select the wanted partition.
  • Page 35: Network

    Menu Operations 3.7 Network In “Network” menu; Press [CH▲/▼] to select menu items among Network Setting, Ethernet Setting, WiFi Manager, Weather. 3.7.1 Network Setting In “Network Setting” menu; Press [Vol◄/►] to switch between Ethernet or WiFi. Warning message will be displayed like the one beside. Press [OK] to confirm it.
  • Page 36: Ethernet Setting

    Menu Operations 3.7.2 Ethernet Setting In “Ethernet Setting” menu; The STB must be switched off. Please connect your STB with the Internet-Router via the Ethernet Cable (RJ45) (not part of the delivery). Press [Vol◄/►] to switch between Off or On. Press [OK] to confirm it.
  • Page 37: Weather

    Menu Operations WPA/WPA2 mode Ø Enter the correct password. You can see below menu: “Red” button means back step, “Yellow” button means shift input method. WEP mode Ø user have to select the key number among KEY_1~KEY_4. Ø user have to enter the correct password. 3.7.4 Weather The correct network configuration allows receiving actual Weather data.
  • Page 38: Troubleshooting

    Troubleshooting 4 Troubleshooting There may be various reasons behind receiver problems. Check the receiver according to the procedures described below. If you can’t solve your problem even after following the troubleshooting procedures, please contact the dealer, Do not open the receiver cover, it may cause a dangerous situation.
  • Page 39: Technical Specification

    Technical Specification 5 Technical Specification VIDEO Decoding MPEG-4 & MPEG-2 & MEPG-1 compatible Bit rate Max 15Mbps Output PAL/NTSC Aspect ratio 4:3, 16:9, Auto Active pixel SD: 720x480 @ 30fps; 720x576 @ 25fps HD: 480p, 576p, 720i, 720p, 1080i Output connector RCA, HDMI AUDIO Decoding...

Table of Contents

Save PDF