Rodgers 535 Owner's Manual page 20

As you can see, there are variations of each sound located in the variations above Variation 0 and
there are 128 pages of extra variation. By combining the Variation Select messages, actually called
a "Controller 0" and "Controller 32" messages (used to select the various pages) with a Program
Change message, the sounds in the variations above Variation 0 and the various pages can be selec-
ted. For example, sending Variation Select #1 Page #8 and Program Change #5 would select
"Electric".
To send a Variation Select and Program Change message from a MIDI coupler:
1. Hold SET.
2. Press and hold the MIDI coupler (coupler will flash as it is held).
3. Hold SET and press the key which corresponds to the variation desired (CC-OO):
Low C (Great)
Low C# (Great)
Low D (Great)
etc.
Low C (Swell)
Low C# (Swell)
etc.
Low C (Pedal)
Low C# (Pedal)
etc.
Low F (Pedal)
Variation 0
Variation 1
Variation 2
Variation 61
Variation 62
Variation 122
Variation 123
Variation 127
4. Continue to hold the MIDI coupler and press another key that corresponds to the Variation
Page desired (CC-32).
5. After both Variation Number and Variation Page are selected, release the MIDI coupler (it
will continue to flash).
6. Press key which corresponds to the Program Change desired:
Low C (Great)
Low C# (Great)
Low D (Great)
etc.
Low C (Swell)
Low C# (Swell)
etc.
Low C (Pedal)
Low C# (Pedal)
etc.
Low F (Pedal)
Program Change 1
Program Change 2
Program Change 3
Program Change 62
Program Change 63
Program Change 123
Program Change 124
Program Change 128
16