Unpacking; Post/Beam Box; Accessory Carton; Cabinet Carton - Launch X-831M Installation And Parts Manual

LAUNCH

Unpacking

X-831M wheel aligner is packed in three separated
boxes: a post/beam wooden box, an accessory carton
and a cabinet carton.

Post/Beam Box

For unpacking of the post/beam box, please take Fig.2.1
as reference. The post assembly and the lateral beam
assembly are contained in this wooden box.
Fig. 2.1
1. Lateral beam; 2. Lateral beam fastening iron
sheets; 3. Post fastening iron sheets; 4. Post

Accessory Carton

Two front targets, two rear targets, two mechanical
turntables, printer, four wheel clamps, four wheel clamp
hanging brackets, monitor, brake pedal depressor and
steering wheel holder, etc. are packed in one package
box as shown in Fig. 2.2.
Fig. 2.2

Cabinet Carton

For cabinet box, please take Fig. 2.3 as reference. The
communication cables and the computer host are inside
the cabinet. The User's Manual and Installation and
Parts Manual are contained in cabinet drawer.
X-831M Wheel Aligner Installation and Parts Manual
2
General Information
Fig.2.3