Table of Contents
Advertisement
Your mobile phone's audio is transmitted through your vehicle
audio system; the system will automatically mute your radio when
using the Phone function.
DISPLAYED INFORMATION
When a phone is connected to the system, the display shows
various information (if available):
❒ status of roaming;
❒ network signal intensity;
❒ mobile phone battery charge;
❒ mobile phone name.
To consult the list of mobile phones and supported functions, visit
the www.alfaromeo.it website (for Italy) or the www.alfaromeo.com
website (for other countries) or call Customer Service on
00800.2532.0000 (the number may vary depending on the
country: please refer to the reference table in the "Customer
Service number list" paragraph herein).
PAIRING A MOBILE PHONE
IMPORTANT Carry out this operation only with car stationary and
in safety conditions; this function is deactivated when the car is
moving.
Even though the mobile phone pairing procedure is described
below we always recommend to consult the mobile phone owner's
handbook.
24
To pair the mobile phone, proceed as follows:
❒ activate the Bluetooth® function on the mobile phone;
❒ press the PHONE button (9-fig. 1) on the front panel;
❒ if no phone is paired with the system yet, the display shows a
dedicated screen;
❒ select "Yes" to start the pairing procedure then search for the
uconnect™ device on the mobile phone (if "No" is selected,
the Phone main screen is displayed);
❒ when prompted by the mobile phone, use its keyboard to enter
the PIN code shown on the system display or confirm on the
mobile phone the PIN displayed;
❒ from the "Phone" screen you can always pair a mobile phone
pressing the "Settings" button: press the "Add Device" button
and proceed as described above;
❒ during the pairing stage a screen is displayed showing the
progress of the operation;
❒ if the pairing procedure is completed successfully, a screen is
displayed: answer "Yes" to the question to pair the mobile phone
as favourite (the mobile phone will have priority on all other
mobile phones that will be paired later on). If no other devices
are paired, the system will consider the first associated device as
favourite.
Note The priority is determined according to the order of
connection for mobile phones which are not set as favourite. The
last phone connected will have the highest priority.
Advertisement
Table of Contents
