Toshiba D-VR610KU Owner's Manual page 45

Start playback on the external device
to record from.
Press [REC MODE] to select a
recording mode.
Refer to "Recording Mode" on page 33 for DVD
or "Recording" on page 99 for VCR.
Press [.STOP] / [.... EJECT /.STOP]
on the unit to stop recording.
This operation may take
awhile to be completed.
Select the input of the unit which the
external device is connected. (L1, L2
or
DV(l3»
• To use the input jacks on the rear of this unit;
Select "L 1"
by
using
[INPUT SELECT -E» .
• To use the input jacks on the front of this unit;
Select "L2" or "DV" (L3) by using
[INPUT SELECT -E> ).
When you want to record to a
cassette tape:
Press [VCR].
Insert the cassette tape with an
erase-protection tab into the cassette
compartment.
Press [e REC] on the unit to start
recording.
When you want to record to thedisc::
Press [OVD].
Press [OPEN/CLOSE ....] to open the disc
tray. Place the disc to record properly.
Press [OPEN/CLOSE .... ] again to close
the disc tray.
It takes a while to load
the disc.
2
5
4
7
3
6
1
~~~@$i~_
Before recording from an external device, refer to the
instructions for the connection on page 44.
.Bfl:fig,glg9Jm!n.IIA~",mJmrtn.;flb'rEr···**t%_!fitf·e"f"
Wr!I'T·.trrtHfj;W
r
,M1tfee
Turn on the TV and press
[I/O ON/STANDBY], and be sure to
select the input of the TV to which
the unit is connected.
\ i - - - - - - - - + - - - - - 1
j
EN 45