WARNING
Study, understand and follow all instructions provided
with this product. Read these instructions carefully
before installing, operating, servicing or repairing this
tool. Keep these instructions in a safe accessible place.
INTENDED USE OF THE TOOL
The MPTK76 is intended to be used for soldering, heat
shrink and general wiring and terminal repair. Do not
use this tool outside of the designed intent. Never
modify the tools for any other purpose or use.
BEFORE USE
Before use, READ AND UNDERSTAND THE WARNINGS
ON PAGE 5 and check the parts diagram and part
number listing on page 6 to make sure all parts are
included. If any parts are missing or damaged, please
call your distributor.
Caution: To help prevent personal injury
Normal use of this product is likely to expose the user to
dust and/or microscopic particles containing chemicals
known to the State of California to cause cancer, birth
defects or other reproductive harm. Always wear
appropriate safety equipment and clothing when using
this product. Study, understand and follow all instructions
provided with this product. Failure to read and follow all
warnings and operating instructions may result in
damages and serious injury or death.
product (users and bystanders).
which it was designed.
modification of the tool or use of the tool with
accessories not designed for it could result in serious
injury or death.
size and design for the job that you are attempting to
perform.
adequately equipped area.
in secure position and will not move during repair.
DO NOT DISCARD – GIVE TO USER
ELECTRONIC MICRO TORCH KIT
Page 1
1 YEAR LIMITED WARRANTY
(TORCH AND PLIERS. ASSESSORIES ARE CONSUMABLE)
Torches must be empty when returned for warranty.
The manufacturer warrants this product to the original user against
defective material or workmanship for a period of 1 year from the
date of purchase.
The manufacturer reserves the right to determine whether the part
or parts failed because of defective material, workmanship or other
causes. Failures caused by accident, alteration or misuse are not
covered by this warranty.
The manufacturer, at its discretion, will repair or replace product
covered under this warranty free of charge. Repairs or replacements
of products covered under this warranty are warranted for the
remainder of the original warranty period.
The manufacturer or its authorized service representatives must
perform all warranty repairs. Any repair to the product by
unauthorized service representatives voids this warranty. The rights
under this warranty are limited to the original user and may not be
transferred to subsequent owners.
The warranty is in lieu of all other warranties, expressed or implied,
including warranties of merchantability and fitness for a particular
purpose. Some states do not allow the exclusion or limitations of
incidental or consequential damages, so the above limitations may
not apply to you.
PRODUCT INFORMATION
Comprehensive. Includes MTMAT torch, wire cutters,
needle nose pliers, lead-free solder, soldering
attachment, heat-shrink deflector, and tips.
Durable. Triple plated pointed soldering tip for 10X the life.
Customizable. Adjust both flame sharpness and length
from 3/4" to 2-3/4" for up to 2,500°F and 1.5 hrs.
MPTK76
Made in Taiwan
to Matco specifications
1702058-14 MA