DOLD VENTURA BIKE-PACK SYSTEM Series Instructions

Advertisement

Quick Links

Thank you for purchasing our VENTURA BIKE-PACK SYSTEM.
Before Use please read all instructions and our Limited Warranty carefully.
To Fit : Buell Firebolt XB9R (03-04),
Firebolt XB12R (03-09)
BU008/B L-Brackets
PF12/B
Pack-Rack
SR12/B Sport-Rack
GH12/18/B Grab-Handle
A range of various style packs for the Aerodynamic systems,
along with storm covers and optional straps (where applicable)
are available.
Check with your local dealer, distributor or contact us direct for
the latest models.

FITTING KIT CONTENTS

LD001/B locking device (fitted to L-Brackets)
1 LK001/S Key
1 BU008 Crossmember
3
2
/
" x 1¾" UNC Allenhead bolts (zp)
8
2 M8 x 35 Allenhead bolts (black zp)
2 M8 x 40 bolts (black zp)
2 M8 x 80 Allenhead bolts (black zp)
2 Part #460 – special nut (black zp)
2 M8 Spring washers (black zp)
10 M8 x 17.0 x 1.4 flat washers (black zp)
2 Part #462 Mounting brackets (black zp)
2 M8 Nyloc nuts (black zp)

FITTING INSTRUCTIONS

1
Remove the pillion and riders seats, and rear body.
2
Remove and discard the pillion footrest casting to subframe,
rear mounting bolts. At this mounting bolt the part #462
3
brackets, using the
/
" x 1¾" Allenhead bolts provided. Leave
8
loose.
BU008B : Issue 8 : June 2011
Manufactured by:
Diagram #1
Legend to Diagram #1
(1)
Part #462 mounting bracket
3
(2)
/
" x 1¾" Allenhead bolts
8
3
Disconnect and remove the turn signal indicators.
4
Remove the inner mudguard mounting bolts, allowing the inner
guard to hang downwards.
5
Cut the templates from the instructions. Place over the holes
where the turn signal indicators have been removed. Mark the
centre of the new hole and drill an M6 (¼" ). This will be for
rerouting the indicator wires.
6
Fit the BU008 crossmember upwards, underneath the rear
frame. Place the two special nuts down through the large top
holes and secure the crossmember vertically from underneath
with the M8 x 40 bolts, M8 spring and flat washers supplied.
Leave loose.
128-134 Maui Street, P.O. Box 10-393, Hamilton, New Zealand
Telephone +64 (7) 849 4392, Facsimile +64(7) 849 4114
E-mail: dold@ventura-bike.com Internet: www.ventura-bike.com
Page 1 of 4

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VENTURA BIKE-PACK SYSTEM Series and is the answer not in the manual?

Questions and answers

Summary of Contents for DOLD VENTURA BIKE-PACK SYSTEM Series

  • Page 1 ” x 1¾” Allenhead bolts provided. Leave Leave loose. loose. BU008B : Issue 8 : June 2011 Page 1 of 4 128-134 Maui Street, P.O. Box 10-393, Hamilton, New Zealand Manufactured by: Telephone +64 (7) 849 4392, Facsimile +64(7) 849 4114 E-mail: dold@ventura-bike.com Internet: www.ventura-bike.com...
  • Page 2 M8 nyloc nut ® M8 flat washer BU008B : Issue 8 : June 2011 Page 2 of 4 128-134 Maui Street, P.O. Box 10-393, Hamilton, New Zealand Manufactured by: Telephone +64 (7) 849 4392, Facsimile +64(7) 849 4114 E-mail: dold@ventura-bike.com Internet: www.ventura-bike.com...
  • Page 3 Always place heavy items at the bottom of the pack and load evenly. Do not position sharp objects against the fabric of the pack. Dold Industries Limited ("Dold") warrants this product to be free from MAXIMUM CARRYING CAPACITY defects in materials and workmanship under normal use and...
  • Page 4 BU008B : Issue 8 : June 2011 Page 4 of 4 128-134 Maui Street, P.O. Box 10-393, Hamilton, New Zealand Manufactured by: Telephone +64 (7) 849 4392, Facsimile +64(7) 849 4114 E-mail: dold@ventura-bike.com Internet: www.ventura-bike.com...

This manual is also suitable for:

Ventura bike-pack system

Table of Contents