Lega DV4 Series Instruction Manual page 10

2.0 OPERATING INSTRUCTIONS 2.0 OPERATING INSTRUCTIONS 2.0 OPERATING INSTRUCTIONS 2.0 OPERATING INSTRUCTIONS
Before plugging the uncapping machine into a line power socket, make sure that the main switch (fig. 1 item
C) is set to 'O' (as shown in fig. 1).
Plug the DV4 uncapping machine into a power socket.
Make sure that the mushroom-head emergency button has not been operated, then turn the main switch (fig.
1 item C) to the right.
FIG. 2 Knife adjustment lever
LEGA LEGA
LEGA LEGA
srl srl srl srl
C C C C ostruzioni ostruzioni A A A A pistiche ostruzioni ostruzioni
www.legaitaly.com - - - - Tel 054626834 www.legaitaly.com www.legaitaly.com www.legaitaly.com
E E E E
D D D D
FIG. 1 Control panel
Set the thermostat (fig. 1 item E) as illustrated in paragraph 2.1 of
this manual, 'Instructions for thermoregulator use'.
The default temperature setting - which on average has been found
correct - is 80/90°C.
Control knife heating by actuating the selector switch 'Heating' (fig. 1
item B) then wait a few seconds to allow the knives to heat up to the
pre-set temperature.
To adjust the knives, turn the lever (fig. 2) until the required thickness
is reached; the knives are closed when the lever is positioned
vertically.
pistiche – – – – via Maestri del Lavoro 23 pistiche pistiche
Tel 054626834 Tel 054626834 – – – – Fax 054628279 Tel 054626834
via Maestri del Lavoro 23 – – – – 48018 Faenza via Maestri del Lavoro 23 via Maestri del Lavoro 23
Fax 054628279 – – – – P.iva 00043230390 Fax 054628279 Fax 054628279
A A A A
B B B B
C C C C
48018 Faenza 48018 Faenza 48018 Faenza
P.iva 00043230390 P.iva 00043230390 P.iva 00043230390
10 / 27