Goldstar LW-C1230XL Owner's Manual page 9

3. Loosely assemble the sill support using the
parts in Fig. 3.
4. Select the position that will place the sill
support near the outer most point on sill
(See Fig. 4)
NOTE: Be careful when you install the cabinet
(frame guides ¤ are broken easily).
5. Attach the sill support to the cabinet track hole
in relation to the selected position using
2 Type A screws in each support(See Fig. 4).
6. The cabinet should be installed with a very
1
slight tilt(about /
2
outside (See Fig. 5).
Adjust the bolt and the nut of sill support for
balancing the cabinet.
7. Attach the cabinet to the window stool by
driving the screws ¤ (Type B: Length
below) through the front angle into window
stool.
8. Pull each Frame curtain fully to each window
sash track, and repeat step 2.
9. Attach each Frame curtain the window sash
by using screws ¤ (Type C).
(See Fig. 6)
") downward toward the
/
5
8"
INDOOR
¤ Frame Guide
INDOOR
Screw(Type B)¤
and
Sill support ¤Ł
- 9 -
Sill Support ¤Ł
Nut ¤Œ
Bolt ¤Ø
Screw(Type A)¤º
Cabinet
OUTDOOR
Screw(Type A)
Sill support ¤Ł
Front Angle
Screw(Type B)¤
OUTDOOR
Fig. 3
Fig. 4
Sash track
Fig. 5
Type C
¤
Fig. 6