Toro 07046 Installation Instructions page 2

1
Installing the Rear
Cargo-Box-Accessory Mount
Parts needed for this procedure:
1 Rear cargo-box-accessory mount
8 Flange-head bolt (5/16 x 3/4 inch)
Procedure
1. Align the holes in the rear cargo-box-accessory mount
to the threaded inserts on the bottom of the cargo
bed (Figure 1).
1. Flange-head bolt (5/16 x 3/4 inch)
2. Use 8 flange-head bolts (5/16 x 3/4 inch) to secure
the rear cargo-box-accessory mount to the cargo box
(Figure 1).
Figure 1
2
Installing the Cargo Bed
Supports
Parts needed for this procedure:
1 Cargo bed support (right)
1
Cargo bed support (left)
8 Flange-head bolt (5/16 x 3/4 inch)
Procedure
1. Align the holes in each of the cargo bed supports to
the threaded inserts on the bottom of the cargo bed
(Figure 2).
g191316
1. Flange-head bolt (5/16 x 3/4 inch)
2. Secure the cargo bed supports to the cargo bed with 8
flange-head bolts (5/16 x 3/4 inch)
3. Torque the flange-head bolts to 15 to 17 N∙m (133 to
147 in-lb).
2
Figure 2
(Figure 2).
g191317